View Full Version : I finaly got 35s for my truck..no lift needed

12-07-2006, 09:40 PM
I didnt know if theyd fit, most people say you need to do a bodie lift.....but i guess not. Their 35\12.5\15 BFG Mudds....took a bit of what i like to call clearancing to get the 15s on my F250.....the pick of the front tire is with the truck flexing a bit, not that it accualy flexes..and a good old poser shot to boot

Ginger Snaps
12-07-2006, 09:44 PM
nice mang get like a 4'' suspension lift and your goooood

12-07-2006, 09:59 PM
ya well see

12-07-2006, 10:01 PM
i like those steel spokes..how much are they new anyways?

12-07-2006, 10:02 PM
depends on where you get em, and who you know...i paid about 270 for all 4, all said and done......wholesale

12-07-2006, 10:27 PM
Looks like you have a little bit of tire sticking in. [f]

12-07-2006, 10:36 PM
meh, not to bad......

12-08-2006, 01:19 AM
nice mang get like a 4'' suspension lift and your goooood

then youll need bigger tires. This is 4" in the rear with 39.5" Iroks. The front actually took alot more lift tho.

In The Zone
12-08-2006, 10:06 AM
looks good now get some lift because they are gona get chewed when u start hammering it...

12-09-2006, 03:42 PM
yea i have 16.5 x 10 rims and i dont think ill be able to fit 3s under my truck prob gunna stick with 33s

12-10-2006, 08:26 PM
looks good man !

12-11-2006, 12:35 PM
nice wheels, where's my 20 bucks??

12-11-2006, 12:38 PM
ya i know i need to get it to you, im gunna make it 25.......hmm, i may be driving by their this week.....otherwise i could drop it off at your house?

12-11-2006, 12:56 PM
I'm just buggin ya, no hurry, lol. I live in Abby, so it's abit out of your way. Truck looks good with the 35's

12-11-2006, 01:10 PM
well i have to head out to abby on wends....

02-18-2007, 12:32 PM
Just trim that rusty shit off and yer golden.

02-18-2007, 06:25 PM
yep, im workin on it..and the pics of the front are missleading...theirs plenty of room and havent had any troubles with them rubbing yet

02-18-2007, 06:51 PM
No rubbing? Not even the leaf springs?

Curious... what backspacing you have? :confused0006:

EDIT: askin' cuz my Q78s on 16x6" wheels rub the leafs but nothing else.

02-18-2007, 07:33 PM
I threw 35s on my blazer before lift, I had to trim a bunch and they rubbed a bit on full turn... those were BFG 35s though, also known as 33 inch Interco tires

02-21-2007, 04:52 PM
i can turn full lock and they havent rubbed yet, dont remember what the offset on the wheels are but its quite a bit, their on a 15x10 inch rim, and the rims have a deep dish to them....lol. and they are a pretty dam close to 35inches man. had some 36 inch tsl's next to them and they were less than an inch taller......

02-21-2007, 07:28 PM
haha thats dope dude your truck is a twin of mine

02-25-2007, 02:16 PM
ya i know man, should go wheelin some time