PDA

View Full Version : squeaky brakes???


Hello Kitty
11-05-2006, 04:43 PM
when i push on the brake pedal the front right squeels? even if it's lightly.

lots o meat left on the pads. anyone had this before? how to get rid of it?

lizard
11-05-2006, 06:00 PM
probley the pins rubbin, i use antiseeze on them and the back of the pads

Troy
11-05-2006, 06:12 PM
maybe its your warning tabs on the pads?? if it is you can bend them back to get some more life outta the pads

Hello Kitty
11-05-2006, 06:13 PM
probley the pins rubbin, i use antiseeze on them and the back of the pads

hmmmmmmmmm

damn it's annoying. people stare at me.

:eek:

lizard
11-05-2006, 06:28 PM
well u do have a sexy bum

Hello Kitty
11-05-2006, 06:35 PM
well u do have a sexy bum


[d]

Nutbar
11-05-2006, 06:43 PM
Hey Snacks your rotors are probably glazed you need to rough up the surface of the rotor a little bit and try to give it a bit of a cross hatch pattern with some emory paper or a sander or something

Hello Kitty
11-05-2006, 06:46 PM
Hey Snacks your rotors are probably glazed you need to rough up the surface of the rotor a little bit and try to give it a bit of a cross hatch pattern with some emory paper or a sander or something

word that mikey-g-baller

thanks. will try all.


[cheers]

Murd0c
11-05-2006, 06:52 PM
the front brake pads are new just put them on there before I sold it to ya

Hello Kitty
11-05-2006, 07:17 PM
the front brake pads are new just put them on there before I sold it to ya

see first post dumbass.

[1d]

Cheeky
11-05-2006, 10:22 PM
Take the pads out,you prob got a couple rocks stuck in the pad,----stave last weekend[15] [15] [15]

Hello Kitty
11-05-2006, 10:39 PM
Take the pads out,you prob got a couple rocks stuck in the pad,----stave last weekend[15] [15] [15]


nope, clean

Camorokee
11-06-2006, 06:32 AM
id go with the rotor scuffing AND lube the slides and anti squeel on the pas.

82F150
11-06-2006, 09:03 AM
id go with the rotor scuffing AND lube the slides and anti squeel on the pas.

ya id do that and file the ends of the pads at a slight angle... but not so much that it cuts the pad area too much...but helps to get shit outta there... mechanic buddy told me this and it seems to help a lot

Always broke
11-06-2006, 04:30 PM
you can also bevel the edges of the pads that usually helps also are the antisquealers still on the back of the pads ?????[cheers]

Hello Kitty
11-16-2006, 04:58 PM
scuffed up rotor and used anti seize and it's gone.


thanks everyone.

[cheers]

dirka dave
12-05-2006, 08:47 PM
Pads are more than likely glazed, check with screwdriver by scratching them

Hello Kitty
12-05-2006, 10:18 PM
Pads are more than likely glazed, check with screwdriver by scratching them

like OLD post said it was fixed.