PDA

View Full Version : Help on Rancho kit


bakelite
10-29-2006, 04:36 PM
I can't get the Rancho site to work on dial up....can someone check what #4405 springs are for. I bought a lift kit (supposedley around 4") and I don't think it's what I was told. Came with 5168 and 5118 Rancho shocks. Supposed to be for a 89 YJ but things don't look right. Thanks. [cheers]

cjMike
10-29-2006, 04:43 PM
Shocks are right for a 2.5 inch lift as the springs are as well for the front . Hope that helps .[cheers]

bakelite
10-29-2006, 04:47 PM
Thanks Mike...that's what I figured, I got bullshitted....shit. [27]

cjMike
10-29-2006, 04:51 PM
No worries what size tires you running? You can always throw on a set of shackles and get an inch or so?Not the best way to do it but it might help![cheers]

bakelite
10-29-2006, 05:02 PM
I got a 3" body lift now and 33" tires...it will work I guess. Looks like I need two suspension lifts now lol. [cheers]

Nutbar
10-29-2006, 06:42 PM
Yeah it would seem that you got bullshitted Joe as far as I know Rancho only ever makes a 2.5 to 3 in kits for pretty much everything.

I don't know the part numbers but on any of the YJ Rancho kits that I have installed the rear springs are a 4 leaf pack and the frts are a 3 leaf with a short overload spring on the bottom.

bakelite
10-30-2006, 03:47 AM
Yup, that sounds like what I got Mikey.....[27]

Thanks guys, not such a big deal I got the lift pretty cheap and it was supposed to have been hardly used. I'll get another lift kit or use this one, not sure yet what to do.:confused: I don't like being bullshitted but I guess I should give the guy the benefit of the doubt..no use stressing the small shit anyways. [cheers]

Matt
10-31-2006, 08:36 PM
rancho's biggest lift is 2.5" for a yj. they don't list anything bigger for it.