PDA

View Full Version : ZF swap


89Ford
09-18-2006, 04:43 PM
Im gunna be trowin a ZF in my F250...my quetion is, does anyone know if i have to change the master cylinder for the clutch, ive got the gay ass mazda 5 speed right now..Will the cross meber work or am i gunna have to change that as well? The guy im getting the trany from siad his Tcase bolted right up to the one he did and he said his drive shafts were good because the ZF was pretty much the same lenght? Im planning on putting a new slave in it and a centerfoce clutch....Any imput would be much appriciated

Thanks Brian

F150HULK
09-18-2006, 06:51 PM
I'm going to do the exact same swap maybe this weekend.

When are you doing yours?

I think everything is going to be the same.

boyzen
09-18-2006, 08:35 PM
your master is the same also cross member should be the same and driveshafts easy swap.

Bigsexy
09-19-2006, 11:36 AM
i was guna do the same swap when i toastd my tranny.. the guy who did my clutch told me that the spline count on the BW1356 tcase was diff from the splines on the ZF.. and he told me the shafts would have to be changed.. i think i recolect somethin bout him sayin the the slave was external aswell??? i forget that part soo double check it..
and the guy DOES werk ata automotive shop.. not just some dipshit
[cheers]

89Ford
09-19-2006, 04:09 PM
well he was prob refering to the heavy duty ZF, the one in the F350s....they would prob have different spline count, and as far as the external slave i dono, but i know theirs 2 different ZFs and the Heavyer one of the two wont work with the F250 shit..

F150HULK
09-19-2006, 07:16 PM
Shit I have a 350 one. Going to check the splines now

F150HULK
09-19-2006, 07:22 PM
Peeeeeeerfect!

boyzen
09-19-2006, 09:07 PM
i was guna do the same swap when i toastd my tranny.. the guy who did my clutch told me that the spline count on the BW1356 tcase was diff from the splines on the ZF.. and he told me the shafts would have to be changed.. i think i recolect somethin bout him sayin the the slave was external aswell??? i forget that part soo double check it..
and the guy DOES werk ata automotive shop.. not just some dipshit
[cheers]
the guy you talked to IS a total dipshit he doesn't know shit.......[1d]

F150HULK
09-24-2006, 08:50 AM
[stupid]

Just did mine and it bolted up perfect. Just need to change the hydrolic line and I'm done. Anybody got one????????????????????????????