PDA

View Full Version : Clutch Stuck in Trooper2


Gaybait
08-22-2006, 09:49 PM
My friend bought a trooper2 for 500 bux.. the car is stuck in first gear somehow even when its in neutral... and it reaks of clutch... there is no clutch at all.. nothing in the pedal.. he bought a new master clutch cylinder we re bled the system many times.. still no clutch.. when u try and release the clutch it just stalls.. The car REAKS of clutch...

anyone have any idea of what it could be?? we began tearin off the parts to get ready to drop the tranny but id still like to kno what the experts think? Broken Pressureplate maybe???
and it idles terriblely because the clutch is always half engaged it seems like

Toy_Runner
08-22-2006, 09:50 PM
problem one trooper2 for $500

trevyota
08-22-2006, 09:51 PM
umm... time for a new clutch.

gordwould
08-22-2006, 09:54 PM
or possible tranny

Toy_Runner
08-22-2006, 09:55 PM
check washer fluid

230
08-22-2006, 10:24 PM
linkage?

Hello Kitty
08-22-2006, 10:29 PM
whip the horse and a geenie will appear. give her your stolen GMC logo and stab yourself in the chest, lie in a pit and pour lime all over yourself and take a nap.

redman
08-22-2006, 10:34 PM
whip the horse and a geenie will appear. give her your stolen GMC logo and stab yourself in the chest, lie in a pit and pour lime all over yourself and take a nap.


[stupid] best idear you had in a while

Hello Kitty
08-22-2006, 10:40 PM
[stupid] best idear you had in a while

not bad, not bad. coulda said drive under a semi and see if you can make it doin 180.

I would feel bad if anyone saw his blood or touched it cause they would be cursed with the stupid fuckhead bat.



can't wait to go to stave and burn stolen cars and put accessories on my own vehicle, do stupid shit appologize then keep posting bullshit and get respect, then do more shit etc etc.

Gaybait
08-22-2006, 11:20 PM
useless

gordwould
08-22-2006, 11:30 PM
useless
what the isusuzu or replies?
linkage?
or possible tranny
but sounds like tranny is stuck in gear :confused:

sj-x 500
08-23-2006, 12:12 AM
you can't shift it if it is under torque. since it smells of clutch, it is slipping, the springs are fucked, change it.

Nasty1
08-23-2006, 08:07 AM
If it is hydraulic clutch could be slave/master cyl.,

Gaelen
08-23-2006, 08:58 AM
ya man change the clutch and start from there
it is most likely just a fucked clutch

Gaybait
08-23-2006, 12:28 PM
alright we shall do that

ROBO
08-24-2006, 07:24 AM
keep in mind them clutches for those thing aree real expensive around a grand.. for some of them...and if its the one with the reverse fork... youll be pullin the exhaust too get the trans oout.

bakelite
08-24-2006, 09:10 AM
no shit, a grand for a clutch?? wow![27]

johny5
08-24-2006, 09:31 AM
did you ever go pack up to eagle ridge and remove the FIBC tag on that truck . i never saw the pic..............

Gaybait
08-24-2006, 06:16 PM
did you ever go pack up to eagle ridge and remove the FIBC tag on that truck . i never saw the pic..............

shut up mang seriously, yes i removed it and i dnt give a fuck if i didnt post a picture of it scratched off

230
08-24-2006, 06:20 PM
keep in mind them clutches for those thing aree real expensive around a grand.. for some of them...and if its the one with the reverse fork... youll be pullin the exhaust too get the trans oout.

Are they really a $1000? thats damn near what it costs to rebuild an auto.

Toy_Runner
08-24-2006, 06:26 PM
1000 bucks for a $500 tropper, sell it

ROBO
08-24-2006, 09:01 PM
ya that was a few years back... for a full luk kit slave bearings etc... they might be cheaper now with dyna pacs and shit..hell of a job changin them too!!

Gaybait
08-24-2006, 10:00 PM
Yeah so we got it down today.. the tranny tipped ov er while we dropped it and it tipped and cumped both crankcases full of shit onto his driveway.. was frickin hilarious.. we took the clutch apart to see that the throwout bearing was off the shaft for 1, for 2 the clutch was burnt as a mofo... so we went to lordco to see our buddy and he gave us a clutch kit for it and a new slave ( get it all at once ) so he's got a fully new system.. came out to 303$.. Clutch was 370+ For the kit we got it for 235 and the slave we got for 34 :)

All in all we hafta wait till school starts again so we can use the tranny jack to put it back up into it because its too difficult to do it in his driveway with 1 floor jack and wood and rope so.. thanks everybody for the help u guys all did a swell job :)

Hello Kitty
08-24-2006, 10:53 PM
[35]

factor
11-02-2006, 09:06 PM
well thats great kids .............

mini
11-02-2006, 09:27 PM
wholly bring up an old postr why dont ya

Trooperhaven
04-13-2007, 04:59 PM
LOL what the hell 1000 bucks:confused: i own that trooper hes talking about and i paid 300 for a whole rebuild kit throw bearing clutch disk ,p plate and a clutch slave because the old one leaked. So this model 90 trooper 4 door xs is not the 1000$ clutch job , THANK GOD to ! it would of been sold but now i'm driving it with a 3 in b lift and it perssssss

MikeWild
04-13-2007, 05:13 PM
wholly bring up an old postr why dont ya

[15]