PDA

View Full Version : xj question?


bratboy
08-10-2006, 08:51 AM
i was in the bush this weekend and tried the 89 xj for the first time. i found out that i have 4low working great but when i put it in 4high neither the front or rear drive the vehicle??? i was told it was the vaccum line going to the front diff but if so why wouldn't i have drive to the rear diff? i was thinking it may be the linkage to the transfer case is not adjusted right so it is not allowing it to fully engage into 4high which would stop both front and rear from driving , wouldn't it? any ideas????????
:rolleyes: :rolleyes: :rolleyes: [16] [16] [16]
thanx for any help

DirtyComanche
08-10-2006, 09:45 AM
Linkage, yes.

Fiddle with it. You need only a screwdriver (flat) and a 13mm combination wrench.

Matt
08-12-2006, 06:22 AM
sounds like neutral not 4 high.

CORC
08-12-2006, 11:03 AM
yup, nuetral is the biggest swing for the XJ,.. your missin it slightly,.. onlt needs adjusting,.