PDA

View Full Version : S10 Lift Kits


Balls First
07-31-2006, 07:08 PM
well i just bought myself an 83 S10 and i have no idea where to look for kits considering ive never really dealt with chevy trucks before anyone got any ideas?

Toy_Runner
07-31-2006, 07:08 PM
do a custom 4 link with 44's
twlk to mudram

MetalMan
07-31-2006, 07:13 PM
Just drop it on a fullsize truck frame. Cheaper in the long run.

Toy_Runner
07-31-2006, 07:13 PM
oh and mabey a new duraxmax motor

Balls First
07-31-2006, 07:16 PM
yeah i was gonna go with a toyo solid axle up frontand get rid of that ifs if i cant find a kid and re arked springs in the back

Toy_Runner
07-31-2006, 07:20 PM
dont get rearked springs they will sag fast if anything get blocks or custom made springs

Toy_Runner
07-31-2006, 07:21 PM
and if you do find a ifs lift it will be expensive and a waste of money, with big tires you will break cv's just do a sas

Balls First
07-31-2006, 07:35 PM
i gatta look into a few things and yeah i could make bigger shackles and go axle under no problem but ive never modifed a front end that much so it'll be entertaining but for now im gonna build the roll cage n shat and giver till i break the stock suspension im gonna cut out the fenders to fit some 31's

Chody
07-31-2006, 09:01 PM
yah dude trailmaster or bds 6 inch lifts both 2750$ NOT installeed if yah just want 33's i say keep ifs

sj-x 500
07-31-2006, 09:13 PM
it's about the same price to go with a d44 - d60 sas... leafs or cols would be about the same really. depends on the skill of the fabricator really

Chody
07-31-2006, 09:23 PM
newbie loll i could see us jerry rigging too much and just breking it

ez_b
08-01-2006, 12:34 AM
had an 86 s-10 blazer, spent too much money and time and broken parts with the ifs lift. looked ok, but pretty much sucked my left nut. go the route i should have, and go strait axle, prolly cheaper and more realiable/capable.

Spooner
08-01-2006, 04:59 PM
I got a 97 s10 and I got a price from NSOR and it was $1900 for a 5 inch trail master IFS lift. I just want a bit of a big bigger tire like a 31 maybe 33's. I wouldnt be able to do the SAS myself so i think it would end up costing large cash. Plus i dont do any crazy 4x4ing just frs type deal to go camping. Would anyone here know what a SAS would cost and how much shit I would have to mod?

Balls First
08-01-2006, 09:12 PM
well you have to remove all the ifs shit i know that much lol and im thinking more towards keeping the ifs at this point and as for crasy 4x4ing? ha you havent seen me wheel if it aint broken im still goin till it is im working on water resisting/proofing as much as i can to make her run while your drowning hahaha ive already figured out how to seal off the carb so lets hope it works ill find out in late sept when i get this stuff all done

Balls First
08-01-2006, 09:13 PM
and chody man lift kits are a peice of cake

Big-Luke
08-01-2006, 09:55 PM
hahahah if u were a good fabricator and had conections liek me ud just make ur own easy migth take some time and u do have a welder dont u

Chody
08-02-2006, 05:55 PM
connections eh... like tnt? lol whenas the jeep done?

Grantman
08-02-2006, 06:19 PM
XJ/YJ D30 is about the right width and bolt pattern for an S10. I wouldn't waste any money on an IFS lift, they all suck ass and the amount of wheel offset required to clear the components causes accelerated wheel bearing/ball joint/steering linkage wear.

Millhouse
08-04-2006, 09:36 PM
you shouldnt need to cut the fenders to fit 31's i have a stock s10 blazer and it has 31s on it. barly any rubbing

Balls First
08-05-2006, 10:24 PM
luke you dumbass im already working on a body lift should give me about 2 inches and we have the same training you asshat and im the one with more expereince machining and im thinking about just leaving it and stuffing bigger tires on it untill i break something but for now i have to change the clutch cable and fork because i snapped the cable and bent the fork lol anyone know if a solid driveshaft will work in models with a split shaft?

Balls First
08-05-2006, 10:26 PM
lol connections man im getting 30 inch pro comp xterrians at warehouse price and all the parts i need i can get 70% off from napa and steel is pretty much free

Balls First
08-05-2006, 10:29 PM
yeah ive got a welder fuck man only thing i cant do at my place is bend tubing

ray
08-06-2006, 11:39 PM
trail master 5 inch

trevyota
08-07-2006, 12:58 AM
yeah ive got a welder fuck man only thing i cant do at my place is bend tubing

then why dont you sas it and stop pussyfooting around.