PDA

View Full Version : New truck


redneckjames
07-16-2006, 02:50 PM
i just got a 1990 ford f 250 4x4 and am having problems with the 4x4 i can get it into 4 high and it works fine but i cant get it into 4 low?????????? how can i fix this so i can take it weelin

shockless
07-16-2006, 02:58 PM
mine does that, the linkage is loose could be worht a look

sj-x 500
07-16-2006, 02:58 PM
pull back, push down, pull back more.

Bigsexy
07-16-2006, 02:58 PM
check linkages arent hittin ne thing.. move back N forth a bit while tryn to put it into L.. see if that helps. [cheers]

SBC hris
07-16-2006, 10:46 PM
To put my truck in 4 low I have to put it in neutral, 83 chev 3/4 ton.

jeeper
07-16-2006, 10:54 PM
In the jeep with a geared transfer case sometimes i need to take the streeses out by backing up a bit and shiftin while moving very slowly !

dexter302
07-17-2006, 10:20 PM
ok,,ford you say..,,, pull transfercase shifter bacvk into 4hi,, thehj push to teh left,, then pull back,,, the back to tehr right,,, then back to lock it,,, its a saftey feature so you dont go from 4hi to 4lo and blow out the ttransfer case

apefrill
07-17-2006, 11:04 PM
To put my truck in 4 low I have to put it in neutral, 83 chev 3/4 ton.
My Bronco is the same, gotta be in neutral and sometimes I even have to turn the engine off its being a real bitch

S'ploder
07-18-2006, 12:39 PM
I also have to put my Exploder into neutral to access 4 low. Was freaking out that it was broken but just had to read the manual. http://www3.telus.net/trishl/Trish/tard.gif

NickB
07-18-2006, 04:11 PM
Burn it