PDA

View Full Version : roll on liner


bogealot
06-22-2006, 03:01 PM
i guess you can see that i have a lot to ask, as this is the 3rd wright up in 1 day....oh well time to "getter done." how have your guys experiences been with something like hurculiner, or similiar product...i could spend the money and get it linex or rhino line but come on its a jeep.the only reason i am even thinking of doing this is b/c i have to hack the floor up to install my 2 inch body lift.I heard hurculiner is good and easy to use from one person, but would like some more opinions.

bakelite
06-22-2006, 03:47 PM
It's all pretty good stuff, prep is the thing....sand good, clean better and your good to go. [cheers]

Jeep Junkie
06-22-2006, 03:52 PM
I used Hippoliner with good results in my jeep. Good prep is key. I used a Schutz (sp?) gun and it gave a nice finish.

boyzen
06-22-2006, 04:19 PM
hippo liner and a gun works awsome

UU
06-22-2006, 04:26 PM
I used 2 kits of Gator Gaurd, sprayed it on, works great where I prep'd properly.

bogealot
06-22-2006, 04:48 PM
thats the thing i dont have access to a pray gun....will roll on still look good????:confused:

UU
06-22-2006, 05:05 PM
I think you can roll on the Gator Gaurd shit, just make sure you scuff the area properly so it'll stick better. I was a little lazy under the seats thinkin it's no big deal and now it's starting to flake.

KINGCRUISER
06-22-2006, 05:26 PM
I just used Premium Rubberized Rockerguard from Canadian Tire, comes in a rattle can or for a gun. Turned out awsome from the rattle can, you can see some pictures of the box I did for ym interior in the custom fabrication section. Pretty much all those products work good. Anyone know of any to stay away from?

hamberger
06-22-2006, 06:08 PM
Herculined my fenders and rockers. Sticks super good. Apply a coat and then within 20 minutes apply the second coat when its tacky... thats the key. expensive. KMS tools carries it.

ham

lizard
06-22-2006, 06:45 PM
yah its like 150+ a gallon

youngun
06-23-2006, 01:42 PM
KingCruiser: I used the Premium Rubberized Rockerguard from Canadian Tire to. Took me 2 1/2 cans to do two coats and 3 coats on the floor. Looks great and only cost me $18ish dolla

Jeepnut
06-23-2006, 02:03 PM
I used 2 kits of Gator Gaurd, sprayed it on, works great where I prep'd properly.



[stupid] ...me to

dentedup
06-23-2006, 08:27 PM
I just found a jeep and drove over it, seemed to roll on pretty good[31]

FrogDog
06-24-2006, 08:33 PM
use a company that does armour gaurd (not a self application), nothin beats it, all that gator guard shit wont last unless u do a very and i mean a very good prep job, (even at that i think its fair to midl'n) but $ 2 $ polyurethane is the way to go, you wont be disapointed.....

ov course this is my personal and experienced oppinion [cheers]
FD