PDA

View Full Version : Front end wobble


flipper
06-20-2006, 09:53 PM
recently noticed a harsh wobble comming from the font end of my toyota at
about 30k. jacked the font up and the tires and knuckels are tight. running
histeer and 35" boggers, histeer rod ends have a small amout of play in them
where they join the seer arm.would that be enough to shake the font end back and fourth that bad,and should the rod end nuts be tightend right up or will that cause binding.:confused:

sparky
06-20-2006, 10:00 PM
tighten nthe nuts right tight and but cotter pins in them.......did this just start wobbling or since u did some other work.......

flipper
06-20-2006, 10:09 PM
did a bunch of stuff at once but thought they might bind in articulation if they were tightend right down.So thanks Ill give it a try and see what happens.

sj-x 500
06-20-2006, 10:25 PM
could be the loose rod ends which will wreck havoc on everything, or it could be if you just lifted it, the caster angles are too far outta wack

tnerb
06-21-2006, 12:06 AM
make sure its towed in 1/8 inch. and what u do to ur front end. exzactly what front spring do u run. theres also a good possibility its ur tires.

Big_Ern
06-21-2006, 01:43 AM
could be the loose rod ends which will wreck havoc on everything, or it could be if you just lifted it, the caster angles are too far outta wack


I'n guessing thats probably it. What did you change since last time it drove straight?