PDA

View Full Version : What is the part # for 2wd brake lines?


Kinslayer
05-16-2006, 05:02 PM
! I went down to lordco and looked at the 2wd ones vs the 4wd ones, they were about the same overall length - yous guys were sayin that the 2wd ones were 5 inches longer - any part numbers?

dentedup
05-18-2006, 07:05 AM
the ones I got are longer, don't have any #'s for ya , my buddy has a wreaking yard where I grabed mine from

Kinslayer
01-11-2007, 01:03 PM
How much longer? What kind of truck were they off of?

Andrew Goll
01-13-2007, 05:16 PM
ill have to dig up the receipt for the ones i got, doesnt liike like im goin to have any problems with an 8 inch lift

Kinslayer
01-13-2007, 10:13 PM
Cool. Are they rubber ones, or what?

Andrew Goll
01-14-2007, 10:46 AM
yah man they just had some brackets that i had to hack off
well shit looks like i have every receipt bu that one

u2slow
01-14-2007, 11:59 AM
'84 Chevy 2wd 3/4 pickup with the big brakes (code JB7) should be ~24". Do this look right?

http://partimages2.genpt.com/partimages/314919.jpg


Same truck but 1-ton is almost the same, but the end is correct for a D60 caliper.

Kinslayer
01-14-2007, 04:31 PM
Mines a D44 caliper. here's a picture of mine.
40615

Andrew Goll
01-14-2007, 07:47 PM
yah there kinda like the ones u2slow posted and i think they are roughly 24 inches, i just went and ordered 2 wheel drive hoses at wyatt auto parts in town and brian knew what i was lookin for and hooked me uup

Kinslayer
01-15-2007, 10:10 AM
'84 Chevy 2wd 3/4 pickup with the big brakes (code JB7) should be ~24". Do this look right?

http://partimages2.genpt.com/partimages/314919.jpg


Same truck but 1-ton is almost the same, but the end is correct for a D60 caliper.

Hmm, so if I reference 'jb7' they would be able to look em up at lordco? Or just get em to look up a chev 3/4 ton 2wd. I guess whichever way they can find it.

B
01-15-2007, 10:24 AM
just use the index in there book find the ones w the end's u need and the longest length avaible was all i did ... took ten minutes going threw there book ....[cheers]

Kinslayer
01-15-2007, 10:41 AM
I'll have to do that. I always have the worst luck going to lordco and 'getting them to look through the book'. F'n hell anyways, heh.
I guess you don't remember what the part number for yours was eh?

u2slow
01-15-2007, 11:11 AM
Try these.... :confused0006:

Raybestos #s...
left: BH38184 25-1/4" long
right:BH3856324-1/4" long

JB7 is the higher GVWR brake system on a Chevy 3/4-ton. JBx rpo codes are usually applicable when they look up any GM truck brakes.

FWIW, if you thought the tool at the parts counter is bad with applications, they are in fact WORSE with part numbers if they need to cross it over. [16]

EDIT: On my next encounter with short brake hoses, I'm going to give the Dodge style a try. They use a single drop over the pumpkin - a copy of the rear arrangment.

Kinslayer
01-15-2007, 12:19 PM
Yeah my buddy was saying we could do that - use my stock hoses right to the axle with a center drop. I'll have a look at those part numbers, thanks dude.

Kinslayer
01-15-2007, 07:37 PM
Cool, I picked up those lines, it looks like i'm gonna need two LEFTs, the only difference between the left and right with these two lines is A) the left is slightly longer (as you stated) and B) the right is male threaded (looks like a bolt). The Left is female (looks like a nut). My steel lines coming down both appear to require female connectors.

I just juiced em up good with WD-40, hehe.