PDA

View Full Version : HEy HElp!!!


chevy_gurl
05-12-2006, 05:18 PM
Does any one have any dtails on how to fix or repair a front wheel bearing on a 1995 Pontiac SunRunner 4x4. or no of any sites available to me to look at. ??????

factor
05-12-2006, 08:43 PM
go to the dealer and ask to look at the mauals or go and buy one at helm.com

Denaliboy
05-12-2006, 09:01 PM
doesnt nocashmikey have something like that?

sj-x 500
05-12-2006, 09:46 PM
they are just standard wheel bearings.

remove auto/manual hub start with the 6 small bolts , then the snap ring, then the base.


next remove the nut and lock tab, caliper, and pull hub off. hammer out old bearings and seal, hammer in new.

on re install, torque nut to 50 lbs, while spinning hub. then back off 1/4 turn, tighten till resistance is felt, and back off 1/8th turn.

then reinstall everything in the reverse order you took it off.

FINGERS
05-13-2006, 12:15 AM
bring it over we can do it here

u-can-2
05-13-2006, 02:38 AM
they are just standard wheel bearings.

remove auto/manual hub start with the 6 small bolts , then the snap ring, then the base.


next remove the nut and lock tab, caliper, and pull hub off. hammer out old bearings and seal, hammer in new.

on re install, torque nut to 50 lbs, while spinning hub. then back off 1/4 turn, tighten till resistance is felt, and back off 1/8th turn.

then reinstall everything in the reverse order you took it off.

[iagree]

Straight outta Haynes yo [h]

230
05-13-2006, 09:06 AM
[ibacon]