PDA

View Full Version : mods


Fritschinator
05-08-2006, 02:27 PM
how hard is it to put a 4.9litre out of a 94 f150 into a 80 f250
and will the 351w 5speed bolt tothe 4.9

Nile
05-08-2006, 03:36 PM
hard cuz f250 and f350 are about the same, f150 is the big differance.

Fritschinator
05-08-2006, 04:02 PM
i took a tape to both trucks and the frame rails and motor mounts are the same is just i dont know about power stering pump and thing like that

Nile
05-09-2006, 12:18 AM
my dad put a power steering pump out of a f250 in his f150

Nile
05-09-2006, 12:19 AM
go to a wrecker and ask

Foes
05-09-2006, 02:08 PM
nile, are you in love with the wrecker?

asigalet
05-09-2006, 07:09 PM
Check out fordtrucks.com. There is a ton of useful info on swaps etc. there. That is where I usually look for info when I can't find it anywhere else.

Nile
05-09-2006, 09:22 PM
nile, are you in love with the wrecker?

no but i am with your mom

stuckle
05-09-2006, 09:23 PM
newbs going at it...

redman
05-09-2006, 09:41 PM
pretty funny actually

shockless
05-09-2006, 09:49 PM
youd need all the efi wiring, and yes the engine will bolt to the trans. if you have the truck to pull it out of itll be alot easier, mounts and stuff too

Fritschinator
05-09-2006, 10:05 PM
thanks for the info
i dont have both trucks yet but i will soon

shockless
05-09-2006, 10:06 PM
basically pull it out of one and put it in the other

Nile
05-09-2006, 10:08 PM
hmm didnt kno it was that ez

Fritschinator
05-09-2006, 10:28 PM
nile how much was the lift for your truck?

is your lift blocks of leaf spring?

shockless
05-09-2006, 10:51 PM
i dont think his is lifted. well it doesnt look like it. and no body lift. there was never a 3 inch kit, and without drop brackets 3 inches would throw the ttb too far out of alignment

Foes
05-11-2006, 02:52 PM
no but i am with your mom
[15] [49]