PDA

View Full Version : project dual t-case


killman
03-26-2006, 05:37 PM
Started my new project to put two transfer cases in my LJ, going to be a little more work than I had thought.Started by putting a 3 inch body lift to make room wich caused a few more problems as you can see by the pics.Going to drop and move the original case and hopfully direct mount the other up in front.

EIEIO
03-26-2006, 07:28 PM
2 sami cases?

killman
03-26-2006, 07:38 PM
No, 2 LJ cases.

sj-x 500
03-26-2006, 08:38 PM
3:1 x 3:1 = 9! to one in the cases

EIEIO
03-27-2006, 10:02 AM
sweet jesus. Dont hit the skinny pedal to hard.















PING!!! [32]

BeerBaron666
03-27-2006, 10:42 AM
Sweet Shane[36] Getter done so we can come up and do some wheelin with ya:D

u-can-2
03-27-2006, 11:16 AM
Got steering [32]

godzuka
03-27-2006, 07:00 PM
steering will be a pain. put a sammy box on the frame and extend the shaft to it. got cross over instead of drag link?

killman
04-08-2006, 05:44 PM
Finally got some more time. Hockey is over so on to the zuki. Stuck it up in the hole should fit good. few little tweeks and some mounts.pics are at the front

BeerBaron666
04-10-2006, 04:52 PM
Is it done yet[f]

BeerBaron Sr.
04-10-2006, 07:52 PM
We"ll see you on the weeekend,I"ll do what I do best,drink some beer and
hand out advice

killman
04-26-2006, 09:31 PM
Well I got it in and it works pretty good. except my header keeps melting my clutch cable and I end up with no clutch. not good in a mud hole!

sj-x 500
04-26-2006, 09:54 PM
i like the shifters!!

lookin good man

youngun
04-26-2006, 10:09 PM
bolt shifts, there is a guy i know that has a screw driver for his haha

sj-x 500
04-26-2006, 10:40 PM
hey... i used to have a screw driver for my kick t-case...

BeerBaron666
04-27-2006, 05:26 PM
[36][36] Hey wheres the pic of you and Emma laying under it:D It's lookin good Shane[cheers]

RebelAngelle
04-27-2006, 05:54 PM
Yeah, the bolt shifters are MINT!!!

maybe if I still had a truck I would change my T-case shifter to that....

killman
04-27-2006, 10:17 PM
Here is my helper, another reason it took so long.

szabotage
05-04-2006, 11:36 PM
nice work, looks like an interesting setup :D

StinkFinger
05-08-2006, 03:28 PM
hows the high range and that out put shaft on the second tcase is failure prone i killed two of them

BeerBaron Sr.
05-08-2006, 04:35 PM
Hey Shane is it done yet?

killman
05-08-2006, 10:35 PM
The high range works alot better now cause I can take off alot better. If I start breaking shit I'm going to switch to all toy running gear.It should be allright I'm not to hard on it(HA HA)! Yes paul it is done yet Just put in a new water pump on friday night finished my front air bags and new rear shocks and mounts last weekend so she is good to go. Just have to put a seat in for the kids but that will have to wait until dad's swim grid is finished on his boat and the holiday trailer is finished and so on


[27] [27] [27]

BeerBaron Sr.
05-11-2006, 08:06 PM
I know your busy but don't forget to keep track of our Junior Hockey Team!!!

u-can-2
05-11-2006, 10:41 PM
Got projects [f]

Uncle Darryl
06-02-2006, 11:36 PM
looks good shane.I hope those are grade 8 bolts for the shifters

shockless
06-02-2006, 11:55 PM
wicked man, never seen it done with plate like that. haha nice helper