PDA

View Full Version : power steering


kamloopsyota
03-04-2006, 09:31 PM
hmm so i have done some searches and all i find are power steering for the 1.3. anyone know who makes a setup for the 1.6??? also does anyone know the length of the rear springs, i measured but keep getting different sizes cause i got no one to hold the end of the tape for me haha. thanks[cheers]

szabotage
03-04-2006, 09:44 PM
the 1.6 trackicks came with factory power steering as an option. good unit upto 33's IMO after that Id upgrade to a toy IFS box. the kick pumps will start springing leaks. the kick pump is sufficient and a reliable unit, and there is a simple upgrade to get more out of it but a better upgrade would be a saginaw pump.

my new setup will be a kick pump, toy IFS box turning 36" swampers. from what I've heard all should be good.

kamloopsyota
03-04-2006, 10:24 PM
oh damn haha yeah that would make sese why i cant find a kit, that should be fine then cause im only running 32's, do you know what years the p/s came on, i have no clue. thanks man.

norm
03-08-2006, 06:34 AM
Just put pwr strg in my sami,used box,pump and reservoir from 92 tracker.
Made an adapter plate for box to frame and another plate to raise the pump.
Longer hoses to reservoir and had to add a u-joint to strg. shaft.
Bit of a hassle,prolly easier to buy a kit for the same components,sure works
nice![cheers]

joshjohnbaun
03-08-2006, 07:55 AM
what did that end up costing you? im lookin to do the same for mine

u-can-2
03-08-2006, 10:11 AM
I used Toy IFS box, and a GM pump with Toy Resevoir. Custom made all the brackets and use the same stock fan belt (got spare if need be :D )

Rear Samurai springs are 42" long[cheers]

joshjohnbaun
03-08-2006, 12:08 PM
what would that cost me? im interested in puttin it on my samurai.. ucan

godzuka
03-08-2006, 12:14 PM
the frame and inner fender mods are the only hard parts. takes about a day to do it right.

joshjohnbaun
03-08-2006, 12:19 PM
ah, godzuka... interested in makin a kelowna trip :D ?? I hear you do some awesom work

kamloopsyota
03-08-2006, 05:21 PM
hey u-can, you movin to kamloops anytime soon??

norm
03-09-2006, 06:33 AM
I paid $150.00 for donor parts and spent about 4 hrs mak'n adapter plates
from 3/8 plate.

cost of be'n able to walk it through the snow with 1 hand= PRICELESS!

joshjohnbaun
03-09-2006, 08:25 AM
hey norm, when i get some more $$$ wanna help me make the brackets and shit? ill supply the beer

EIEIO
03-09-2006, 09:15 AM
I am following a ps build with a Nissan PS pump. I can get these uber-cheap.

kamloopsyota
03-09-2006, 12:59 PM
hey eieio is that you that has bczukis.com?? how are the nissans for mounting, same as a toyota???

EIEIO
03-09-2006, 01:57 PM
Nissan PS pump is basically the exact same as far as I can tell. Still digging more info on it. Yes, its Travis from bczukis.com, no the board isn't back up...

StinkFinger
03-09-2006, 02:05 PM
if you convert to a toy box hydro assist is an easy addon in the future

joshjohnbaun
03-09-2006, 02:19 PM
hmmm yea that will probly be my next investment, then gears, then hack out the fenders, then bigger tires, then motor swap hah