View Full Version : what color wire...
02-16-2006, 04:57 PM
is the ignition switched at the key on 93 v6 pickup that i would tap into for power for gauge? thx.
and where is the best place to splice in?
02-16-2006, 05:05 PM
The FSM wiring diagram for a 89 V6 4runner shows Black w/ Yellow stripe. I'd assume it would be the same, but it is the previous generation, so they may have changed it...
02-16-2006, 05:23 PM
awesome gives me something to look for. thanks!
02-16-2006, 05:26 PM
there is also a Black w/ White wire. but the start position also uses a black w/ white, so its probably safer to looks for the B-Y one if you don't have a multimeter or test light to check.
I looked for the range for the stock oil pressure gauge to see if you could re-use the sender, but I couldn't find any specs on it except that it should be at about 44Ohms with a bunch of test wires connected...
vBulletin® v3.6.4, Copyright ©2000-2018, Jelsoft Enterprises Ltd.