PDA

View Full Version : hubs


brandonf250
02-13-2006, 06:22 PM
on my 1987 bronco it has the lrack plastic warn hubs and on both sides if u grab the hubs with ur hands there is a little bit of play in them,i already tried to tighte them,took them apart and they look ok,any ideas why they are loose

jeepingpw
02-18-2006, 08:39 AM
If you look at the inner part of your hub, it's only held in place by the outer snap ring & the axle shaft snap ring. the outer hub (dial) is screwed to it, The play is the inner part moving, not to worry. You may want to run a bead of silicon around the outside of the Hub (dial) to seal it better

brandonf250
02-18-2006, 01:00 PM
ok thanx!