PDA

View Full Version : Disc brakes


F150HULK
02-03-2006, 07:50 PM
Just thought this was cool

http://www.tsmmfg.com/2500.htm

OldEnuff
02-03-2006, 07:55 PM
Sweet........made to fit.

Now if only I had the $$$$$$$$$$

swamp donkey
02-03-2006, 08:02 PM
I beleive the 1975 grand marquis?came with the 9" and discs that would be a good find master cylinder and rear end.

F150HULK
02-03-2006, 08:09 PM
yup they werk too

Taxidermy
02-03-2006, 08:10 PM
[36] [36] [36] [36] [36] [36] [38] [38] [41] [41] [41]

m j
02-03-2006, 11:43 PM
tsm is a rip off
I think the weld on brackets from a&a manufacturing go for about $12usd for a 9"

OldEnuff
02-04-2006, 01:09 AM
tsm is a rip off
I think the weld on brackets from a&a manufacturing go for about $12usd for a 9"

got any more info on that :confused:

shockless
02-07-2006, 11:47 PM
yah im interested

Nutbar
02-08-2006, 12:32 AM
For the ford 9 inch you can buy a disc brake kit COMPLETE with all brackets calipers rotors emergency brake, everything except rubber lines and e brake cables from ford motorsports ( its the stuff from the 8.8 explorer late model ). I think it was about 500 or 600 canadian. I have used it on a couple of dana 60 builds ( using 9 inch bearing ends and 9 inch 35 spline axles ) good kit easy to use.

phatmatt
02-08-2006, 08:38 AM
Priced it out the other day I think they were about $519 CAD. The ebrake on the explorer works much better than the one built into the caliper too.