PDA

View Full Version : DRIVESHAFT NEEDED


Legend
01-22-2006, 04:37 PM
ive got an 86 Bronco 2 2.9 liter 5 speed and my rear drive shaft is fubared - what you got thanks

Bigsexy
01-22-2006, 05:26 PM
id check with DeeDee she's got a few B2s kickn around..

mini
01-22-2006, 07:16 PM
[iagree]

Squishy
01-22-2006, 07:43 PM
burn it

why not go with a regular style shaft? you will have to get rid of the cv part most likely when you swap diffs?

In The Zone
01-22-2006, 08:42 PM
i used a front shaft from my 97

1350 u joints

nice and skinny but real solid...

bolted right to the 8.8
and transfer....

Legend
01-23-2006, 12:44 AM
the stock front shaft from the 97 150 fit perfect in the b2 thats sweet

OldEnuff
01-23-2006, 01:51 AM
the stock front shaft from the 97 150 fit perfect in the b2 thats sweet

[38] [38] [38] [38] [41] [41] [41] [41] [38] [38] [38] [38]

Legend
01-23-2006, 07:33 PM
hey dan does your 8.8 have a a bolt on style flange or does the u joint bolt right to it with the little u bolts or straps??? really what i want to find out is will it fit in with the stock 7.5 rear

FINGERS
01-23-2006, 07:50 PM
JUST MAKE ONE MANG

shockless
01-24-2006, 08:53 PM
haha you said shaft....

In The Zone
01-24-2006, 11:25 PM
I am running the 8.8 with the flange

the 7.5 i had to use a combo u joint 1310 & 1350


make sure the slip yoke has enough cycle travel

oh ya i had to shorten mine as well due to the longer pinion when i went to the 8.8

Milkman
01-24-2006, 11:49 PM
Make one like Aarons. That thing is strong looking.

epic3
01-25-2006, 01:39 AM
Hey don't you have the front shaft from your Bronco thats VI'd if an F150 shaft'll work then that one may olso

HEAVY METAL
01-25-2006, 01:44 AM
Make one like Aarons. That thing is strong looking.





[9] [9] [9] [9] [9] [9] [9] [9] [9] [9] [9]

ottoman
01-25-2006, 04:57 PM
sounds like a stock b2 , so a mcd's straw sould do[9] [9] [9] [9] [9] [9]

DeeDee
01-25-2006, 10:57 PM
Im SO sorry, If I had seen this sooner I would have had one for u. I traded it for a bumper 2 weeks ago. SORRY :(

Big_Ern
01-25-2006, 11:22 PM
Make one like Aarons. That thing is strong looking.


I sure as hell wouldn't want to run that on the street. Only good for about 30-40km/h until the vibes get bad

Legend
01-26-2006, 01:32 AM
damn it i need a drive shaft

Legend
01-26-2006, 01:32 AM
hey Ern how did u like the front wheel drive burn out haha

Big_Ern
01-26-2006, 02:04 AM
[15][15] that was sweet[c]

I was wondering what the fuck you were doing. I didn't realize you only had fwd[wako]

Squishy
01-26-2006, 02:12 AM
[15][15] that was sweet[c]

I was wondering what the fuck you were doing. I didn't realize you only had fwd[wako]

atleast he could pretend to be cool and say it was twinsticked[22]

fawkin chunks[22] [22] [22]

Nutbar
01-26-2006, 02:33 AM
[stupid]

pumpkin
01-26-2006, 07:33 AM
If you have the old one, I have a bunch of driveshafts. I could probably make one outa what I have layin around.

Legend
01-26-2006, 02:19 PM
i sure do have the old one

DeeDee
01-26-2006, 02:21 PM
Hornythorny has the # for a guy in Mission who has tons of b2 parts.

Legend
01-26-2006, 02:27 PM
sweet right on

StinkFinger
01-26-2006, 02:45 PM
aarons is gay

Legend
01-26-2006, 02:52 PM
arggggg i phoned every auto wrecker around here and they dont got shit

Big_Ern
01-26-2006, 02:54 PM
aarons is gay


[iagree]


the focker that built it was an asshole

DeeDee
01-26-2006, 02:55 PM
Did u call pick a part in chilliwack?

Legend
01-26-2006, 03:00 PM
no i haventi will right now

DeeDee
01-26-2006, 03:04 PM
Thats where I found mine and they were 40$

Legend
01-26-2006, 03:05 PM
wtf pick a part is a joke there like well we have one bronco 2 out there but you would have to come in and see if the rear shaft is in it still

epic3
01-26-2006, 03:16 PM
What about Jobright? They are expensive but got lots all pulled and rebuilt

DeeDee
01-26-2006, 03:21 PM
wtf! When I was there at the beginning of the month they had 3 in a row and 2 of them were 5speeds. I took the ones from the auto. Hmmmm. That is a joke. I know how u feel tho man, it took a long to find what I needed and it was so frustrating[28]

Legend
01-26-2006, 03:24 PM
well dee dee got a spare????

DeeDee
01-26-2006, 03:41 PM
If you had asked me a week or so ago I would. I traded it for a bumper. I have a parts b2 that I have the front one for but the rear was taken out in december. I think ur best bet would be getting the one you have fixed to fit urs. Or get ahold of hornythorny. If I find that number by chance Ill pm u with it asap. Good luck kyle.

Legend
01-26-2006, 03:46 PM
do you have a drivers side front axle??

230
01-26-2006, 05:25 PM
i was at pick a part the other day and they have more than 1 b2

Legend
01-26-2006, 06:51 PM
was any of them standard???

230
01-26-2006, 07:30 PM
I didnt look that close.If i am in the nieghbourhood i will look tommorow for ya.

HEAVY METAL
01-26-2006, 07:37 PM
gee wally yer swell

230
01-26-2006, 07:39 PM
Thanks Beav,Do you need me to check on anything for ya?

Legend
01-27-2006, 12:16 AM
well i picked up a couple different drive shafts and i think i have enough crap to make a decent drive shaft for the b2 - any one any good at cuting up drive shafts??

230
01-27-2006, 05:16 PM
i went to pick a part today and got ys a list of what they got and which ones have shafts and front axels.

Legend
01-27-2006, 06:47 PM
right on let me know