View Full Version : Bumper

01-15-2006, 06:19 PM
Hey, i recently was involved in an incident where i got stuck, and i didnt have a good place to pull from and it was dark, cold, and muddy so i just decided to have the truck pulled from the rear bumper. Seeing as the truck is an 89 F250 the bumper bent so now i need to build a new one. I didnt like the stock one to begin with so i didnt mind wrecking it. So if anyone out their has built their own bumper (rear) let me know of some things i should consider..like thickness of the steel and what not. I have built a few flat- decks in my day but ive never built a bumper. Just thought id see if anyone had any tipps. thanks

In The Zone
01-15-2006, 09:58 PM
make it strong with solid tow points and good departure

01-16-2006, 02:43 PM
ya that was the plan

01-16-2006, 02:51 PM
4/4 or 2/6/ Take a tape measure to it I see what fits.

01-17-2006, 07:23 PM
K will do

01-17-2006, 08:23 PM
2.5"*6"*3/16" wall have made a couple like that..

01-21-2006, 10:33 PM
k thanks

01-21-2006, 10:36 PM
you got stuck?

who pulled you out and trophy'd your bumper?[a]

01-22-2006, 02:33 AM
I always wanted to make front and rear bumpers for the bronco out of railway ties..cheap and could bash the sh&t out of almost anything and probably not hurt em..just mount tow point below and maybe bevel off the corners

01-22-2006, 12:28 PM
Ya i did get stuck, and if werent for dave i dont know how i would have goten out. Im accualy suprised the bumper stayed on and didn't rip right of. I still feel bad for dave since he snaped his tow strap in the procese. Whish i wouda had more $$ to give you