PDA

View Full Version : Question


trevyota
12-18-2005, 11:41 PM
MAX tire size on a waggy 44 under a 2nd gen 4runner

what can i run safely with out breakingshit every day.

36's?
37's?
38.5's?


[7]there's a plot afoot[36]

-----------------------

91 runner>SS<
(shitty and stock)

http://i6.photobucket.com/albums/y219/teij/signal.gif

Burge
12-19-2005, 02:25 AM
your sig is awesome

- - - - - - - - - - - -
http://dungpow.com/smilies/rockout.gif

Always broke
12-19-2005, 07:07 AM
Depending on locker or not I'd say 38.5 with that light of a truck[36]








TRYING TO SCARE THE ON A BOARD NURSE ONE DAY AT A TIME heheheheheh!!

Always broke
12-19-2005, 07:08 AM
Oh nice sig line








TRYING TO SCARE THE ON A BOARD NURSE ONE DAY AT A TIME heheheheheh!!

trevyota
12-19-2005, 08:45 AM
thx boy's

anyone else, nto that todd doesnt know what he's talking aobut, just looking for other's experience, or has anyone on here ever SAS'd a 2nd gen runner.



-----------------------

91 runner>SS<
(shitty and stock)

http://i6.photobucket.com/albums/y219/teij/signal.gif

stuckle
12-19-2005, 04:05 PM
why not be smart and use a toy front end?

Big_Ern
12-19-2005, 04:30 PM
[stupid]



if you're going to lock the front I wouldn't run anything bigger than a 35 with either axle unless you upgrade the shafts & ujoints on the d44 or birfs on a toy axle.



---------------------
Jeeps are like tampons....
Every pussy needs one[f]

TeaBag: '80 Toy "4Runner" on 36" SXs with dual t-cases
Daily Driver: '83 RX-7
Old rig: '89 4Runner 'The Last Ride (http://www.funinbc.com/forum/topic.asp?TOPIC_ID=14144)'

trevyota
12-19-2005, 08:50 PM
well, the toy axel's arent wide enough for the 2nd gen stuff unless you spacer them...



the waggy is a perfect fit and the part's are stupid cheap compared to the toy stuff and, it's in my back yard FOR FREE

anyone wana trade a waggy for a toy........[c]




-----------------------

91 runner>SS<
(shitty and stock)

http://i6.photobucket.com/albums/y219/teij/signal.gif

Big_Ern
12-19-2005, 09:29 PM
since your doing a SAS, your left over IFS parts and some $20 FJ40 rotors are all you need to widen a stock toy axle 3" so its the same as the back. I just did it to mine. Works great[36]

---------------------
Jeeps are like tampons....
Every pussy needs one[f]

TeaBag: '80 Toy "4Runner" on 36" SXs with dual t-cases
Daily Driver: '83 RX-7
Old rig: '89 4Runner 'The Last Ride (http://www.funinbc.com/forum/topic.asp?TOPIC_ID=14144)'

trevyota
12-21-2005, 10:31 PM
but the 44 is free


i do like the idea of toy stuff up front, it mean's i could run some bigger tires......

murdoug, wana buy a 44?

-----------------------

91 runner>SS<
(shitty and stock)

http://i6.photobucket.com/albums/y219/teij/signal.gif

Big_Ern
12-21-2005, 10:42 PM
built up a 44 and toy are basically the same strength. Toy I'd say gets the benefit due to better ground clearance, and Birfs vs u-joint

---------------------
Jeeps are like tampons....
Every pussy needs one[f]

TeaBag: '80 Toy "4Runner" on 36" SXs with dual t-cases
Daily Driver: '83 RX-7
Old rig: '89 4Runner 'The Last Ride (http://www.funinbc.com/forum/topic.asp?TOPIC_ID=14144)'

trevyota
12-21-2005, 10:45 PM
but a ujoint could be fixed easaier on trail, where as if yu grenedea birf? am i right?

-----------------------

91 runner>SS<
(shitty and stock)

http://i6.photobucket.com/albums/y219/teij/signal.gif

Big_Ern
12-21-2005, 11:21 PM
no difference, except a spare birf is bigger to pack around than a u-joint.

But birfs might be easier to change. pull the knuckle off, slide broken birf out, slide new one in. I've never changed many ujoints though.. Broken U-joints also very often wreck the ears on the axle shafts.

When my brf broke it stripped the splines on the inner axle, but this isn't as common.

---------------------
Jeeps are like tampons....
Every pussy needs one[f]

TeaBag: '80 Toy "4Runner" on 36" SXs with dual t-cases
Daily Driver: '83 RX-7
Old rig: '89 4Runner 'The Last Ride (http://www.funinbc.com/forum/topic.asp?TOPIC_ID=14144)'

BAM
12-22-2005, 06:08 AM
a buddy of mine ran 40" boggers with a 350 for 2 years with no problems on toy axles

1990 Toy P/U, Lifted, 35" Boggers.
I've got a Toyota Fetish.

Big_Ern
12-22-2005, 08:48 AM
must be a mud guy going in a straight line, and I'm sure it was open in the front as well. If not he must drive like a pussy

---------------------
Jeeps are like tampons....
Every pussy needs one[f]

TeaBag: '80 Toy "4Runner" on 36" SXs with dual t-cases
Daily Driver: '83 RX-7
Old rig: '89 4Runner 'The Last Ride (http://www.funinbc.com/forum/topic.asp?TOPIC_ID=14144)'

BAM
12-22-2005, 08:48 PM
is a mud guy but no straight line, and he fuckin goes hard aswell.. toy axles just own

1990 Toy P/U, Lifted, 35" Boggers.
I've got a Toyota Fetish.

HEAVY METAL
12-22-2005, 11:01 PM
bam.. u talkin Mason?

-----------------------



BETTER MY SISTER IN A WHORE HOUSE..... THAN MY BROTHER IN A JEEP...

Rebulon Refurbulater
12-24-2005, 05:29 PM
i dunno....we serviced a high pinion dana44 in the front of a toy the other day...it had a sick exo cage too.....driveline angles looked pretty darn good
width was good too....not sure what it was out of...he may have built it