PDA

View Full Version : axle shafts


shockless
12-12-2005, 06:00 PM
is it possible to extend axle shafts? i have a hd d44 and i need like inch and a half longer shafts then f150 ones, but i have some 78 f150 shafts... can i do it, or is there anything i can do?

__________________________________________________ ______________________
87 F250 300/4.9l/ stock running gear/3:54s
mods: k&n filter,3 inch trailmaster body lift,31's,roll bar, warn manual hubs,
"I lifted my truck cause fat chicks cant climb"
http://i4.photobucket.com/albums/y136/cleopatera89/snoopdance7au.gif

sj-x 500
12-12-2005, 06:04 PM
you can't extend one.. you can shorten and re spline.

you can get the ones that fit...

why do they need to be longer...?

Zuk's on Ice.

brandonf250
12-12-2005, 06:09 PM
what u doin to need longer axelshafts? i had my ttb lenghtened and did not need longer axel shafts!

boyzen
12-13-2005, 01:46 PM
the hd d 44 is an inche or so wider than a regular d 44 you will have to find the right ones or get a regular d 44





If I had a vagina it would be as big as a garbage can..

shockless
12-13-2005, 02:40 PM
allright, thanks boyzen, and ya thats why... its not ttb brandon haha i hate ttb

__________________________________________________ ______________________
87 F250 300/4.9l/ stock running gear/3:54s
mods: k&n filter,3 inch trailmaster body lift,31's,roll bar, warn manual hubs,
"I lifted my truck cause fat chicks cant climb"
http://i4.photobucket.com/albums/y136/cleopatera89/snoopdance7au.gif

BeerBaron666
12-13-2005, 02:46 PM
how about this you give me the 78shafts and I'll give you some longer ones[cheers]

-------------------------------
If chicks dug body damage I'd be Hugh Hefner!
Image Insert:
http://www.funinbc.com/forum/uploaded/beerbaron666/200516181821_Banner-Bogger-350.jpg
8.24spudKB

shockless
12-13-2005, 03:36 PM
you have some beerbaron? if so then done, mine need u joints though

__________________________________________________ ______________________
87 F250 300/4.9l/ stock running gear/3:54s
mods: k&n filter,3 inch trailmaster body lift,31's,roll bar, warn manual hubs,
"I lifted my truck cause fat chicks cant climb"
http://i4.photobucket.com/albums/y136/cleopatera89/snoopdance7au.gif

mini
12-13-2005, 03:57 PM
quote:Originally posted by BeerBaron666

how about this you give me the 78shafts and I'll shaft you[cheers]

-------------------------------
If chicks dug body damage I'd be Hugh Hefner!
Image Insert:
http://www.funinbc.com/forum/uploaded/beerbaron666/200516181821_Banner-Bogger-350.jpg
8.24spudKB


fxed it for ya

________________________
1991 302 ho
np 205
ford 9"
dana 44 sas on the way

NO ONE GETS LEFT BEHIND

Burge
12-13-2005, 04:43 PM
hes gonna have to see some ID before giving you beer[22] When i say ID i mean real ID[9]

- - - - - - - - - - - -
http://dungpow.com/smilies/rockout.gif

BeerBaron666
12-14-2005, 07:19 AM
I'm pretty sure there the right ones, I'll try and mesure them tonight. Just let me know how long they need to be just to make sure[cheers]

-------------------------------
If chicks dug body damage I'd be Hugh Hefner!
Image Insert:
http://www.funinbc.com/forum/uploaded/beerbaron666/200516181821_Banner-Bogger-350.jpg
8.24spudKB

In The Zone
12-14-2005, 07:21 PM
ive got both


but also need both [f]

HMMMMMMM
ITS a FORD

shockless
12-16-2005, 05:29 PM
allright beer baron, sounds good im not home right now, so ill figure it out and pm you allright. where are you at? im guessing the coast

__________________________________________________ ______________________
87 F250 300/4.9l/ stock running gear/3:54s
mods: k&n filter,3 inch trailmaster body lift,31's,roll bar, warn manual hubs,
"I lifted my truck cause fat chicks cant climb"
http://i4.photobucket.com/albums/y136/cleopatera89/snoopdance7au.gif

shockless
12-21-2005, 07:08 PM
beerbaron, the one i need are 6th down on this list, and the ones i have are fifth down

http://i25.photobucket.com/albums/c60/mxracer69/Dana44axleshafts_Ford.jpg

__________________________________________________ ______________________

"I lifted my truck cause fat chicks cant climb"

shockless
12-21-2005, 07:09 PM
k nvm, how do i make it work?

__________________________________________________ ______________________

"I lifted my truck cause fat chicks cant climb"

REDNECK-WELDING
12-23-2005, 08:19 PM
i got some up in kamloops that i wll trade you if beerbaron dosent[cheers]

72 GMC 3/4 TON ON 38.5 BOGGERS,SHORTBOX STEPSIDE 10INCH LIFT, WITH CAM INTAKE HEADERS, 3INCH EXAUST. CADILLAC ELECTRIC SEATS
91GMC DIESEL SOLID AXLE WITH COILS, STRIEGHT PIPE

Taxidermy
12-23-2005, 08:44 PM
[8D][f][cheers]

1993 Nissan Pathfinder, with 5 off-road lights.

BeerBaron666
12-24-2005, 08:20 AM
Damn I almost forgot about this[freak] but I do have som axles, they are a little over an 1" longer than mine (78150 axles)and I'm in Vancouver[cheers]

-------------------------------
If chicks dug body damage I'd be Hugh Hefner!
Image Insert:
http://www.funinbc.com/forum/uploaded/beerbaron666/200516181821_Banner-Bogger-350.jpg
8.24 KB

shockless
12-24-2005, 08:43 AM
aight, are you willing to ship or? anyone goin to the coast? haha

__________________________________________________ ______________________

"I lifted my truck cause fat chicks cant climb"

BeerBaron666
12-24-2005, 01:27 PM
hmmmm I'll see what I can comeup with, if anybody is coming down or going up that would be best I'll check it out[cheers]

-------------------------------
If chicks dug body damage I'd be Hugh Hefner!
Image Insert:
http://www.funinbc.com/forum/uploaded/beerbaron666/200516181821_Banner-Bogger-350.jpg
8.24spudKB

shockless
12-25-2005, 06:48 AM
allright sounds good man, you got msn? add me allright mx_racer69@hotmail.com

__________________________________________________ ______________________

"I lifted my truck cause fat chicks cant climb"