PDA

View Full Version : LJ needs more.


killman
11-18-2005, 06:51 PM
How much more HP does a 1.3 have than my lj? Would I be better off to Change engine to newer or Add another transfer case? What do you think?[?]

EIEIO
11-18-2005, 07:22 PM
1.6 8 valve w/ 4.1:1

That can get you basically most places. If you are keeping your diffs, Weld rear and be done with it. Until your board of doing basically everything, then pull a Rich.

________________________
http://images9.fotki.com/v190/photos/5/57608/1984776/jalba_47_1120425022-vi.gif spudspudspudspudspudspudspudspudspudspudspudspudspudspudspudspudspudspud



bczukis.com
SJ413 - Under the knife. Got diesel?


"The vast majority of our imports come from outside the country."
- George W. Bush

dlo
11-18-2005, 07:25 PM
i'll have a 1.3 soon, swapping in a 1.6 16v motor will be out sometime in dec/jan?

88 sami

sj-x 500
11-18-2005, 07:30 PM
lj, generous at 33hp.

sammi 66hp, on a good day.

16v 120hp all day long.

33's on a welded lj diff.... eep....dont. unless you have a few spares.

lj diffs are nice cuz tehy are 4.56, sj's are 4.11, the 3rds and front axles interchange. but on 33's, no less then a samurai axle will live for long welded.

Zuk's on Ice.

killman
11-18-2005, 08:39 PM
So a sammi would basicly give me twice the power? Do they mount basiclly the same? I would have to find a trans aswell correct?

sj-x 500
11-18-2005, 08:58 PM
you'll need the tranny, and to modify your intermeadiate shaft.

one engine mount is different, and the tranny mounts differently. not a big deal if you know how to weld and have some angle iron.

just a thought.. but if you do this, take it easy on that lil t-case too. they can eat it behind a 800 cc, let alone a 1.3L. keep it full of synthetic oil, and it'll be alright

Zuk's on Ice.

killman
11-19-2005, 07:38 AM
Anyone have Engine and Trans Laying aroud ??

dlo
11-19-2005, 07:58 AM
my 1.3 is coming out soon but you'd need to find a tranny, one on ebay for 50 bucks right now

88 sami

u-can-2
11-19-2005, 08:19 AM
quote:Originally posted by EIEIO

1.6 8 valve w/ 4.1:1

That can get you basically most places. If you are keeping your diffs, Weld rear and be done with it. Until your board of doing basically everything, then pull a Rich.

________________________
http://images9.fotki.com/v190/photos/5/57608/1984776/jalba_47_1120425022-vi.gif spudspudspudspudspudspudspudspudspudspudspudspudspudspudspudspudspudspud



bczukis.com
SJ413 - Under the knife. Got diesel?


"The vast majority of our imports come from outside the country."
- George W. Bush


You'll be one to talk in the near future [f][22]

http://www.youbeenx.com/images/smilies/die.gif
*** I used to be sexist........... But bitches hate that shit [:0] ***
http://www.funinbc.com/forum/uploaded/HWA/2004923204537_jeepbeat.gif

killman
11-19-2005, 08:55 AM
Well keep me posted when you get it out.How much and where are ya!

StinkFinger
11-19-2005, 09:57 AM
the sj 410 1L is a direct bolt in i had that swaped in myn for a while with swaping other trannies in be carful because that lj case has such a low high speed






Some people are like slinkies. They arn't good for mutch but they Still put a smile on your face when you push them down the stairs

EIEIO
11-19-2005, 01:44 PM
quote:Originally posted by u-can-2

quote:Originally posted by EIEIO

1.6 8 valve w/ 4.1:1

That can get you basically most places. If you are keeping your diffs, Weld rear and be done with it. Until your board of doing basically everything, then pull a Rich.

________________________
http://images9.fotki.com/v190/photos/5/57608/1984776/jalba_47_1120425022-vi.gif spudspudspudspudspudspudspudspudspudspudspudspudspudspudspudspudspudspud



bczukis.com
SJ413 - Under the knife. Got diesel?


"The vast majority of our imports come from outside the country."
- George W. Bush


You'll be one to talk in the near future [f][22]

http://www.youbeenx.com/images/smilies/die.gif
*** I used to be sexist........... But bitches hate that shit [:0] ***
http://www.funinbc.com/forum/uploaded/HWA/2004923204537_jeepbeat.gif


Whatch you talk about willis? [f]

[36]

________________________
http://images9.fotki.com/v190/photos/5/57608/1984776/jalba_47_1120425022-vi.gif spudspudspudspudspudspudspudspudspudspudspudspudspudspudspudspudspudspud



bczukis.com
SJ413 - Under the knife. Got diesel?


"The vast majority of our imports come from outside the country."
- George W. Bush