PDA

View Full Version : help with jerryrigging my blower motor :D


badgeman
11-08-2005, 12:04 PM
I've got an 89 tracker, but sthin is shot in the electrical for the blower motor and I dont't have time or money to get it all checked out, and i know squat about electrical. (but i do know the motor works)

my dad was sayin to hook a rocker switch up to the battery and to the blower motor and throw an inline fuse on just for safetys sake, cuz i'm goin up to merritt for the long weekend, and need the truck for work for the days before i go up.

any tips tricks or pointers? thx in advance

Tracker Pride.... sorta...

digger
11-08-2005, 12:10 PM
gas and a match will heat it up just fine

-----







GET OFF THE TIT

badgeman
11-08-2005, 01:13 PM
im aiming for something not so explosive, but thx

Tracker Pride.... sorta...

duff
11-08-2005, 01:25 PM
RUN A WIRE FROM THE POS ON THE BATT TO A FUSE 30AMPS TO A TOGGLE SWITCH, (PLACE WHEREVER YOU WANT) RUN THE OTHER SIDE OF THE TOGGLE SWITCH TO THE PINK WIRE ON THE BLOWER MOTOR

Taxidermy
11-08-2005, 01:33 PM
cool[f][iagree][iagree][iagree]

m j
11-08-2005, 02:25 PM
post this in the SUZUKI forum.

that is not a chevy.

kootenaycat
11-08-2005, 05:48 PM
quote:Originally posted by duff

RUN A WIRE FROM THE POS ON THE BATT TO A FUSE 30AMPS TO A TOGGLE SWITCH, (PLACE WHEREVER YOU WANT) RUN THE OTHER SIDE OF THE TOGGLE SWITCH TO THE PINK WIRE ON THE BLOWER MOTOR


You may have to ground the blower motor as well because some models ground the motor through the fan switch.

badgeman
11-10-2005, 04:01 PM
thanks a ton for the help, it works like a dream lol
that only ever stays on high. makes the 'truck' feel like florida, without the humidity :D

Tracker Pride.... sorta...