PDA

View Full Version : here are a few of bigorange440s mustang


gordwould
10-17-2005, 05:30 PM
here you go Travis to bad it didn't get to run the sippy hole


Image Insert:
http://www.funinbc.com/forum/uploaded/gordwould/20051017222052_000_1279.JPG
44.11spudKB

Image Insert:
http://www.funinbc.com/forum/uploaded/gordwould/20051017222110_000_1281.JPG
45.11spudKB

Image Insert:
http://www.funinbc.com/forum/uploaded/gordwould/20051017222125_000_1282.JPG
31.71spudKB

Image Insert:
http://www.funinbc.com/forum/uploaded/gordwould/20051017222136_000_1284.JPG
29.1spudKB

Image Insert:
http://www.funinbc.com/forum/uploaded/gordwould/20051017222147_000_1285.JPG
38.94spudKB
and this would be the reason can you say hydro locked ? I'm sure it is supposed to run gas through the carb and water in the rad [f]

Image Insert:
http://www.funinbc.com/forum/uploaded/gordwould/2005101722225_000_1289.JPG
28.5spudKB


Image Insert:
http://www.funinbc.com/forum/uploaded/gordwould/2005101722249_000_1290.JPG
30.06spudKB

Image Insert:
http://www.funinbc.com/forum/uploaded/gordwould/20051017222421_000_1291.JPG
25.05spudKB

Image Insert:
http://www.funinbc.com/forum/uploaded/gordwould/20051017222435_000_1292.JPG
36.51spudKB
and thanks to the cook for the dogs and is was a very gooder time watching mad mike and troy i think his name was in their show down or finally and yes all the trucks playing it was awesome just wish i could of got my ubolts for my front shaft so i had 4wheel but hey its all good [cheers]

http://www.funinbc.com/forum/uploaded/cracmasterg/2004113015120_Rollup.jpg

youngun
10-17-2005, 05:57 PM
Nice/Weird rig [36]

Yes! I have a Mullet, Yes! I'm a Redneck!
-------------------------
91 Grey 2dr. Sidekick
3.5" Body lift
Custom Bumpers and Sliders.
CB

Evan the Blue
10-17-2005, 05:58 PM
Sweet monster Stang! Thats too bad no shaft, I would have like to seen the monster Ford car take on the monster Pontaic Car

I have a drinking problem .... two hands and only one mouth.

230
10-17-2005, 06:02 PM
I thought i saw him leaving.too bad he didnt play with us.

---------------------------------------------------------------------------


....."OK, picture this! I'm naked, hiding inside this refrigerator......"

bigorange440
10-17-2005, 06:18 PM
thanks alot Gord [cheers].... i was going to run the stang in the pit..but it was its first time ever out so i was giving it a bit of a run first..i was about to go over to the pit but i let my bro drive it first and he sunk it in a hole and hydrolicked the motor ...now it goes knock knock knock...so i never made it over to the pit[j][drama]...next time i only drive it:D.....

88 ranger with 7 inch lift and a 79 mustang on 44s

redneck_justice
10-17-2005, 06:43 PM
nice job on the stang looks good. sorry bout the bad luck. fixer up

i think my smith & wesson beets your 4 of a kind

Big_Ern
10-17-2005, 06:51 PM
Cool car man.[36][36][36] (never thought I'd say that about a mustang[f])

---------------------
Jeeps are like tampons....
Every pussy needs one[f]

TeaBag: '80 Toy "4Runner" on 36" SXs with dual t-cases
Daily Driver: '83 RX-7
Old rig: '89 4Runner 'The Last Ride (http://www.funinbc.com/forum/topic.asp?TOPIC_ID=14144)'

Taxidermy
10-17-2005, 08:00 PM
sweet [36]

gordwould
10-17-2005, 09:00 PM
your welcome Travis and its not mine i just post the pics he sent me and my rig is a Little blue b-2 on some balder 38s that only had 2 wheel drive oh and thanks Cris but i never took them just posting [cheers]


http://www.funinbc.com/forum/uploaded/cracmasterg/2004113015120_Rollup.jpg

poostang
10-18-2005, 03:49 AM
fukin sweeeet a poostang















u idiot

ROBO
10-18-2005, 04:29 AM
sweet pics dude!! love that dodge-stang monster travis... fixer and lets get out again dude!!

IF YOU CANT DODGE IT!
RAM IT!

Blazer
10-18-2005, 05:28 AM
Nice looking ride would have liked to see what it could do,well hope you can get it fixed soon and rip some shit up.
For your bro.[slap][slap]

75 Blazer 6in lift hacked fenders 350/4 spd 205tc stitting on 36/1450/15 swampers

EIEIO
10-18-2005, 07:07 AM
I saw that car/truck on a trailer when I was going out to Maple Ridge, was turning off of the hayward connector onto the main highway heading into Mission.

________________________
http://img.photobucket.com/albums/v318/parishilton101/ihnp-172420.gif spudspudspudspudspudspudspudspudspudspudspudspudspudspudspudspudspudspud



bczukis.com
SJ413 - Under the knife. Got diesel?


"The vast majority of our imports come from outside the country."
- George W. Bush

Always broke
10-18-2005, 07:34 AM
Sweet pic's:D:D









TRYING NOT TO SCARE THE ON BOARD NURSE ONE DAY AT A TIME heheheheheh!!

Jeepnut
10-18-2005, 08:48 AM
Someone said to me at K.O.P is that a mustang...I said naaaaaa thats Adrien's car...shit now there's two of them


Cant someone say Monster car shoot out.....[36]

http://www.funinbc.com/forum/uploaded/harry whiteass/2004325174524_stir.gif
Your village called their idiotís missing

Mudgirl
10-18-2005, 09:33 AM
[iagree]











I am a dirty, dirty girl

bigorange440
10-18-2005, 11:21 AM
thanks guys.....i will keep u updated on the damage...i hope to pull it apart today.....and i would be tottaly into a car show down.....

88 ranger with 7 inch lift and a 79 mustang on 44s

epic3
10-18-2005, 11:25 AM
Ya man thats the coolest mustang I've ever seen

DeeDee
10-18-2005, 11:41 AM
[36][36] Rad!

:: Ugly Army ::

shockless
10-18-2005, 02:09 PM
thats sik dude i didnt think it was gonmna be like that

__________________________________________________ ______________________
87 F250 300/4.9l/ stock running gear/3:54s
mods: k&n filter,3 inch trailmaster body lift,31's,roll bar, warn manual hubs,
coming soon:
sas, highsteer, 456's,351 windsor, 38-40s
"I lifted my truck cause fat chicks cant climb"

MetalMan
10-18-2005, 02:50 PM
Oh shit so that's what I was looking at!!! I came over in the little brown Dodge to check it out, so that was you eh? Fuck, I should've come over and traded bullshit for a while. Ah well, next time...

I'm not a drunkaholic, occifer...

bigorange440
10-18-2005, 09:33 PM
well it got pulled apart today and i think its just a bent flexplate...we pulled the oil pan and vavle covers and it was all good..so we pulled the inspection cover 4 the torque converter and the bolts were rubbing the block and the cover and hre plate looks bent....so i think its all good..it just give me more of a reason to put in the stall converter....but anyone else had this problem...really wierd.....

88 ranger with 7 inch lift and a 79 mustang on 44s

MetalMan
10-20-2005, 05:44 PM
Uh oh...what kind of flexplate?

I'm not a drunkaholic, occifer...

pumpkin
10-20-2005, 09:39 PM
I'm not I big dodge spert, but I remember som info that the front bushing in 727's had some problems that would wreck the torque converter,and bend the flex plate. Something to look into,as I can't remember where I got the imformation,,, just some trivia in my memory banks. Do the people know that the mustangs running a 440 dodge?

pumpkin
10-20-2005, 09:40 PM
They do now

bigorange440
10-21-2005, 11:15 AM
well its actually a 383 but close enough....and thatnks for the info ill 4 sure look into that and see how it looks .....i have a flex plate and a new stall converter 4 it...i was saving it 4 my car but oh well it needs it....but im trying to see if they can get a super heavy duty one....and i fired it up after i bent back the plate a bit and its all good ...runs great still....glad about that...so now the tranny will come out this weekend.....thanks.

88 ranger with 7 inch lift and a 79 mustang on 44s

MetalMan
10-21-2005, 02:56 PM
Just don't run ANY aftermarket flexplate with powdercoating on it, the bolts WILL back out unless the powdercoating is removed. And since removing powdercoating isn't all that fun, it's best to just buy one without it.

I'm not a drunkaholic, occifer...

poostang
10-21-2005, 03:00 PM
POOOOOOSTANG















u idiot

fourbyfourer
10-22-2005, 09:51 PM
sweet i saw it up at stave i have some video...love it! good work

Taxidermy
10-22-2005, 10:08 PM
nice [41][41][41]

bigorange440
10-23-2005, 09:23 PM
quote:Originally posted by fourbyfourer

sweet i saw it up at stave i have some video...love it! good work


id like to see the vid.....where abouts are ya????

88 ranger with 7 inch lift and a 79 mustang on 44s

gordwould
10-27-2005, 06:26 PM
hey travis pm robo he works at accurate transmision and he might beable to help and he was there when i came out a couple a weeks ago he has the little white firefly and the black ramcharger

http://www.funinbc.com/forum/uploaded/cracmasterg/2004113015120_Rollup.jpg