PDA

View Full Version : How big of tires?


bakelite
08-15-2005, 04:59 AM
How tall could you go (tires) with a stock Bronco 11 (1986) with lots of trimming and no lift?...and stock steel rims?[redneck]

Bigsexy
08-15-2005, 02:31 PM
depends on how much ur gunna trim... u could "hack" soo u can stuff 38s but ur drivetrain wont hold up.. i wouldnt go bigger then 35s..

gordwould
08-15-2005, 09:33 PM
31s or 33s max but i wouldnt go any higher than 31s with no lift do to you will get lots of rubbing when it starts twisting[cheers]

http://www.funinbc.com/forum/uploaded/cracmasterg/2004113015120_Rollup.jpg

bakelite
08-16-2005, 04:10 AM
cool thanks, gonna try to find some skinny 31's. Buddy pretty much gave me an 86 Bronco11 so I am gonna cut it up, see how far the rust goes, might be a good rig.[8D]


Will F150 rims fit? I guess I need to run some fairly skinny tires, any suggestions?

Explorer guy418
08-16-2005, 07:21 AM
just get some 31.10.5.15 and make a body lift and cut it, well if u cut it put 33s or something, those engines arnt the greatest of power o yeah and watch the tranny with big tires

88 Ranger - R.I.P
|1987 Jeep YJ|4.2L|Rhyno Lined Interior|4'' Suspension Lift|33 Inch Mud Kings|

- Future Upgrades - 3'' body lift, Tube Doors, Onboard Air.
MSN: daryl_crutch@hotmail.com

bakelite
08-16-2005, 11:10 AM
Was gonna just try puttin taller wheels on it for now, I dunno how long it's gonna last, have to see how bad the rust is.



Image Insert:
http://www.funinbc.com/forum/uploaded/bakelite/2005816171021_bronco.jpg
24.83KB

[15]

digger
08-16-2005, 02:45 PM
44s

-----







GET OFF THE TIT

crimsen
08-16-2005, 02:52 PM
you can fit 49's as long as u dun care how much you wanna hack, but how long your vehicle will last with bigger then 33-35's stock is the real Q

------------------------
79 F150 custom
l/s dana 44 under 4" BDS coils
welded 9" under 4" arched leafs.
4.56 gears
35x16 tsl boggers
351 m with edelbrock performer 400 intake and edelbrock 600 carb
on board air
np 205 T case
np 435 tranny

For Off Road Driving

bakelite
08-17-2005, 06:32 AM
I guess probably 31's how about the rims, are ford full size the same bolt pattern?

44's [15][15][15] that would look cool sitting in the yard.

digger
08-17-2005, 01:35 PM
my bronco has them[f]

-----







GET OFF THE TIT

Broncoo
08-17-2005, 07:15 PM
no the b2's are 5 on 4.5" fullsize is 5 on 5.5"

if ya cut 33's will fit no problem

what good is it if you can never think of what to put here

bakelite
08-18-2005, 05:05 AM
thanks![redneck]...almost rolled it on some wet grassy hill yesterday, what a gas. [15]

In The Zone
08-19-2005, 06:06 PM
there great little rigs



Image Insert:
http://www.funinbc.com/forum/uploaded/in the zone/20058200430_new 44.jpg
46.47KB

Image Insert:
http://www.funinbc.com/forum/uploaded/in the zone/20058200547_new441.jpg
55.67KB

HMMMMMMM
ITS a FORD

Rebulon Refurbulater
08-20-2005, 06:24 AM
31s...and match all the tires,,,it will be easier on the equipment

For Sale 38.5x12.5x16.5 tsl sx super swampers on steel 8 lug rims only 2 left for spares. Good from 36 to 38 inch tires...100.00 ea..7"springs for super duty...like new ...send me a msg.
Wheelin',Workin',........oh yeah....Sex!