PDA

View Full Version : tranny again.


Punk in Drublic
08-04-2005, 01:06 PM
sent it to the shop sounds like its fucked. maybe double fucked its hard to say at this point. it should still work but some synchros got a little smashed. so was wondering what stndrd trannies i can put behind the six. i would really like a fivespeed. any suggestions.


fetus: its like veal but human

Punk in Drublic
08-05-2005, 10:06 PM
C'mon, i'm thinkin the five speed that came outa the 90's f150s. that work in a f250? HELLPPP i wanna take it to the pig roast.

fetus: its like veal but human

tbm
08-06-2005, 05:35 AM
what you need to know is what bolt pattern your 6 cylinder came with.

small block or big block (iirc diesel is same as bb).
if it is small block as i suspect then finding a 5speed won't be a problem. i think they are 100 bucks at pick a part in chilliwack.





favourite quote "these guys are all pussies tbm, they belong on bc4x4!"

Goatz
08-06-2005, 05:58 AM
should be the small block bolt pattern

BAH BAH says the Goat

OldEnuff
08-08-2005, 01:35 AM
Ya it's the 302/351W bolt pattern.[freak]

__________________________________________________ ________

'85 Bronco - SASed, Locked and Lifted
'87 Bronco on Propane otherwise stock
________________________
Stay Tuned :P

Legend
08-08-2005, 12:16 PM
get your self a np 435 4 speed or a t 18 and borgwarner combo from late 80s ford





________________________
CHUNKS - 1 BEER - 0

shockless
08-08-2005, 06:08 PM
get a 4 speed t 18, awesome tranny super low 1st

__________________________________________________ ______________________
87 F250 300/4.9l/ stock running gear/3:54s
mods: k&n filter,3 inch trailmaster body lift,31's,roll bar, warn manual hubs,
coming soon:
sas, highsteer, 456's,351 windsor, 38-40s
"I lifted my truck cause fat chicks cant climb"

barracuda
08-08-2005, 06:14 PM
np435 is stronger and lower then the t18

http://www.funinbc.com/forum/uploaded/barracuda/card.gif

"A level" mobile welder
mig,tig,alum spool,stick
rates start at $65 an hr
welder rental from $125 per day


The way to a mans heart is through his zipper!!!

Punk in Drublic
08-09-2005, 07:50 AM
I know the 435 and t18 have wicked first gears, but i'm gonna be dropping to 4.88 or lower gears. i still wanna be able to do 100k if i have to go on the highway. how week are the five speeds.

fetus: its like veal but human

asigalet
08-12-2005, 09:47 AM
What you need to get is the ZF 5 speed which was available from about 88 or so and up. It is what they use on the diesel and they were available for the 6cyl which should be small block bell housing. The other 5 spd that Ford put in was a Mazda 5 speed, which has a short lifespan when you start wheeling with it. Hope this helps!

89Ford
09-01-2005, 03:10 PM
ya what ever you do dont ever put in the mazda 5 speed. My 89 F250 has one and it the worst trans ever. The thing wines so loud and it just feels like shit shifting it. My dads truck has a ZF and there the way to go. Super strong, and it even says in my owners manual you can start out in second gear when your trucks empty.

89 F250 4x4 302 dana60, 50 up front, 4:10s

Rebulon Refurbulater
09-13-2005, 04:24 PM
hey man...my 91 f 350 came with the ZF and it has a 5,75 to 1 first gear and overdrive....tha mazda tranny sucks and doesnt have the low first.....this is a fully syncro trns...including reversr!....in my opinion a great late model on and off road trans.......i run 513's and 42's its takin it fine!....just my opinion[blah]

91 F-350 Long box,standard cab,dual tanks,1200 lb up front,8000 lb out back,hi-steer,5:13's detroit in back,lockright in front.42"irocks on 16" steelies....work in progress!
Wheelin',Workin',........oh yeah....Sex!

shockless
09-13-2005, 05:01 PM
i want a zf!!

__________________________________________________ ______________________
87 F250 300/4.9l/ stock running gear/3:54s
mods: k&n filter,3 inch trailmaster body lift,31's,roll bar, warn manual hubs,
coming soon:
sas, highsteer, 456's,351 windsor, 38-40s
"I lifted my truck cause fat chicks cant climb"

89Ford
09-17-2005, 09:55 AM
ya my mazda trans is on it last leggs, im hopin to find a good ZF but the 4 speed might have to do. If you find a ZF, could you poast how much it cost you, thanks.

89 F250 4x4 302 dana60, 50 up front, 4:10s

toyotapower
09-17-2005, 09:14 PM
sheldon sheldon sheldon, ur fuckin dumb, ur tranny is fine, just we were all wasted every time we pulled it. stop being lazy u dont have $$$$$$ for a 5 speed and ur a stoner :assshake:

[stoned]ps good cookies [stoned]

[chugging]

There's olny 1 way to live and thats the redneck life

Punk in Drublic
09-17-2005, 10:31 PM
colin, the tranny is a little fukered, and i just want the 5 speed,

oh and yes the cookies are grrreaatt, i'm ripped again[b].



______________________
theres 1 gun for every 12 people in the world. the only question now is how to arm the other 11

F150HULK
09-18-2005, 07:19 AM
I'm on my 5th Mazed piece of crap. Geuss that why I have 2.

Henry Ford if you were alive I'd kick your ass!!!

Goatz
09-18-2005, 08:01 AM
get the nv4500 but it costs alot more but its stronger

BAH BAH says the Goat

Punk in Drublic
10-05-2005, 08:50 AM
zf 5 speed outa deisel. is $300 a good price. will it bilt onto my bellhousing. will slave work etc. i got a 4 speed right now t18 i think.

______________________
theres 1 gun for every 12 people in the world. the only question now is how to arm the other 11