PDA

View Full Version : axle lengths


shockless
06-15-2005, 07:30 PM
can someone please measure there d44 axle shafts, out of a hd d44 (hp) and out of a normal one, STranger told me the hd ones are longer, so i dont know if they will work

__________________________________________________ ______________________
87 F250 300/4.9l/ stock running gear/3:54s
mods: k&n filter,3 inch trailmaster body lift,31's,roll bar, warn manual hubs,
coming soon:
in the middle of a sas
"I lifted my truck cause fat chicks cant climb"

Squishy
06-15-2005, 07:43 PM
thats kinda a lot of work just for a measurement, why not just try the shaft?

__________________________
1984 Bronco II, 302, NP435,NP208 Doubler, NP205,5.13 Dana 44/8.8 Fullwidth, Detroit, Coil Front, 36" Militarys, Rock Sliders, Warn 8274

8274, Its Like Ducttape, Never Leave Home Without It!

Got MonoFoam?

Squishy
06-15-2005, 07:53 PM
and they dont interchange, chunks tryd a non HD one in his HD and it didnt work

__________________________
1984 Bronco II, 302, NP435,NP208 Doubler, NP205,5.13 Dana 44/8.8 Fullwidth, Detroit, Coil Front, 36" Militarys, Rock Sliders, Warn 8274

8274, Its Like Ducttape, Never Leave Home Without It!

Got MonoFoam?

shockless
06-15-2005, 07:53 PM
well if anyone has them out i didnt mean gop rip your axle apart just if you had them out sorry. umm the ones i have i need u joints for and i have to pay 40 fro them if they work, so i dont wanna go spend 60 on u joints and have them not work


__________________________________________________ ______________________
87 F250 300/4.9l/ stock running gear/3:54s
mods: k&n filter,3 inch trailmaster body lift,31's,roll bar, warn manual hubs,
coming soon:
in the middle of a sas
"I lifted my truck cause fat chicks cant climb"

Squishy
06-15-2005, 07:56 PM
good point, i dont have any shafts out, but they dont interchange if i remember correctly, they are different lengths

__________________________
1984 Bronco II, 302, NP435,NP208 Doubler, NP205,5.13 Dana 44/8.8 Fullwidth, Detroit, Coil Front, 36" Militarys, Rock Sliders, Warn 8274

8274, Its Like Ducttape, Never Leave Home Without It!

Got MonoFoam?

Broncoo
06-15-2005, 08:04 PM
the u-joints are the same

trying to get where i want to be

for sale:
2 ford np203-205 doubler adapters
REDUCED
$400each OBO!!!

and one 36x12.5x15" tsl sx 20% tread $30

shockless
06-16-2005, 12:36 PM
i knwo the u joints are the same, but i just kinda wanna know so i can pay my neighbour for them if there right

__________________________________________________ ______________________
87 F250 300/4.9l/ stock running gear/3:54s
mods: k&n filter,3 inch trailmaster body lift,31's,roll bar, warn manual hubs,
coming soon:
in the middle of a sas
"I lifted my truck cause fat chicks cant climb"

BeerBaron666
06-16-2005, 01:29 PM
Ok my long side axle is 34" from the center of the ujoint to the end of the splines but mine isn't the HD it's out of a half ton But here's your good news the HD one should be an inch longer from what I remember, I have a HD long side axle out of a truck if you need it It's not out of a HP and I don't know if that matters knowing ford it does:D

-------------------------------
VOTE FOR PEDRO!
----------------
Image Insert:
http://www.funinbc.com/forum/uploaded/beerbaron666/200516181821_Banner-Bogger-350.jpg
8.24spudKB

shockless
06-16-2005, 02:09 PM
can you measure the hd one beer baron? how much do you want for it?

__________________________________________________ ______________________
87 F250 300/4.9l/ stock running gear/3:54s
mods: k&n filter,3 inch trailmaster body lift,31's,roll bar, warn manual hubs,
coming soon:
in the middle of a sas
"I lifted my truck cause fat chicks cant climb"

BeerBaron666
06-16-2005, 02:12 PM
I can measure it a little later tonight but it's goin gto be around 35" give or take but I'll make sure later for ya[cheers]

-------------------------------
VOTE FOR PEDRO!
----------------
Image Insert:
http://www.funinbc.com/forum/uploaded/beerbaron666/200516181821_Banner-Bogger-350.jpg
8.24spudKB

BeerBaron666
06-16-2005, 03:05 PM
Ok it's 34 3/4" from the end of the slpine to the center of the joint.

-------------------------------
VOTE FOR PEDRO!
----------------
Image Insert:
http://www.funinbc.com/forum/uploaded/beerbaron666/200516181821_Banner-Bogger-350.jpg
8.24spudKB

shockless
06-16-2005, 07:04 PM
hmm allright, well pm me with a price


__________________________________________________ ______________________
87 F250 300/4.9l/ stock running gear/3:54s
mods: k&n filter,3 inch trailmaster body lift,31's,roll bar, warn manual hubs,
coming soon:
in the middle of a sas
"I lifted my truck cause fat chicks cant climb"