PDA

View Full Version : what is this?


shockless
06-01-2005, 06:57 PM
what is this curved thing, and in the second pic what is this bracket for that the axles resting on mine has 2 one facing backwards on the drivers side and forwards on the passengers side

87 F250 300/4.9l/4 speed stock running gear/4:10s
mods: k&n filter,3 inch trailmaster body lift,31's,roll bar, warn manual hubs,
coming soon:
2" susp. lift

Broncoo
06-01-2005, 07:17 PM
pics help

trying to get where i want to be

for sale:
3 ford np203-205 doubler adapters
REDUCED
$400each OBO!!!

and one 36x12.5x15" tsl sx 20% tread $30

shockless
06-01-2005, 07:18 PM
pics wont work i need to resize or something how do i?

87 F250 300/4.9l/4 speed stock running gear/4:10s
mods: k&n filter,3 inch trailmaster body lift,31's,roll bar, warn manual hubs,
coming soon:
2" susp. lift

Broncoo
06-01-2005, 08:37 PM
use whatever photo editing program you have on your computer and resize em till they are under 90kb



trying to get where i want to be

for sale:
3 ford np203-205 doubler adapters
REDUCED
$400each OBO!!!

and one 36x12.5x15" tsl sx 20% tread $30

shockless
06-02-2005, 06:07 PM
cant figure it out can i send them to you broncoo and you can post them?


87 F250 300/4.9l/4 speed stock running gear/4:10s
mods: k&n filter,3 inch trailmaster body lift,31's,roll bar, warn manual hubs,
coming soon:
2" susp. lift

crimsen
06-02-2005, 06:36 PM
send em to me Crimsenfizzlefists@yahoo.com


------------------------
79 F150 custom
l/s dana 44 under 4" BDS coils
welded 9" under 4" arched leafs.
4.56 gears
35x16 tsl boggers
351 m with edelbrock performer 400 intake and edelbrock 600 carb
on board air
np 205 T case
np 435 tranny

For Off Road Driving

shockless
06-02-2005, 07:20 PM
they are those ones i sent you on msn crimsen anyways sent

87 F250 300/4.9l/4 speed stock running gear/4:10s
mods: k&n filter,3 inch trailmaster body lift,31's,roll bar, warn manual hubs,
coming soon:
2" susp. lift

crimsen
06-02-2005, 08:44 PM
Image Insert:
http://www.funinbc.com/forum/uploaded/crimsen/20056314437_curvedsteering1.JPG
16.51KB

Image Insert:
http://www.funinbc.com/forum/uploaded/crimsen/20056314445_curvedsteering3.JPG
16.86KB

------------------------
79 F150 custom
l/s dana 44 under 4" BDS coils
welded 9" under 4" arched leafs.
4.56 gears
35x16 tsl boggers
351 m with edelbrock performer 400 intake and edelbrock 600 carb
on board air
np 205 T case
np 435 tranny

For Off Road Driving

shockless
06-02-2005, 08:55 PM
thanks jesse, also why is there no shock mounts?

__________________________________________________ ______________________
87 F250 300/4.9l/4 speed stock running gear/4:10s
mods: k&n filter,3 inch trailmaster body lift,31's,roll bar, warn manual hubs,
coming soon:
2" susp. lift

Broncoo
06-02-2005, 08:58 PM
the curved thing is for push/pull style steering can't remember what it is called tho i always forget cus i always throw em in the scrap pile

don't know what that other bracket is for looks kinda useless

i take it you didn't pull the axle yourself

trying to get where i want to be

for sale:
3 ford np203-205 doubler adapters
REDUCED
$400each OBO!!!

and one 36x12.5x15" tsl sx 20% tread $30

shockless
06-02-2005, 09:00 PM
no i didnt i met the guy at canadian tire the axle has a 3 inch raised steerign block on it, should i just ditch it and make my own steering?

__________________________________________________ ______________________
87 F250 300/4.9l/4 speed stock running gear/4:10s
mods: k&n filter,3 inch trailmaster body lift,31's,roll bar, warn manual hubs,
coming soon:
2" susp. lift

Broncoo
06-02-2005, 09:04 PM
your gonna have to go with some kida crossover or hi-steer since you are using leafs

yeah make you own steering

trying to get where i want to be

for sale:
3 ford np203-205 doubler adapters
REDUCED
$400each OBO!!!

and one 36x12.5x15" tsl sx 20% tread $30

shockless
06-02-2005, 09:09 PM
allright could i make the crossover too? i dont really know what it is

__________________________________________________ ______________________
87 F250 300/4.9l/4 speed stock running gear/4:10s
mods: k&n filter,3 inch trailmaster body lift,31's,roll bar, warn manual hubs,
coming soon:
2" susp. lift

STranger
06-03-2005, 04:03 AM
the other bracket is for the shock mount.those diffs use the pin style shocks,forward of the diff on the right side,behind on the left.
did that diff have 8 bolt or 5 bolt hubs?

i dont need people to get me,i just need people to get out of my way

if you put 20 grand into a 30 grand buildup,you dont have a $20,000 rig-you're just $10,000 short of having anything.

shockless
06-03-2005, 06:27 AM
there 8 bolt, its form an f250 the hd one with the braces around the pumpkin going down to the pinion, how do shocks mount to this?

__________________________________________________ ______________________
87 F250 300/4.9l/4 speed stock running gear/4:10s
mods: k&n filter,3 inch trailmaster body lift,31's,roll bar, warn manual hubs,
coming soon:
2" susp. lift

STranger
06-03-2005, 06:47 AM
shocks have a pin type mount on the bottom(same as top on most fords)that goes through the hole in the bracket circled in your picture.

i dont need people to get me,i just need people to get out of my way

if you put 20 grand into a 30 grand buildup,you dont have a $20,000 rig-you're just $10,000 short of having anything.

In The Zone
06-03-2005, 07:40 AM
Ditch the arm go histeer...

u can get the paasenger knuckle machined

thats what i did

looks good and works way better than oem

just ask all the people who have bent tierods[f]

HMMMMMMM
ITS a FORD

Jroc
06-03-2005, 07:46 AM
it all just spare parts, sell em to someone with a chev so they can have some good parts to go with their ford drivetrain

WARNING!
This site may or may not contain meat or other animal by-products,lewd behavior,breif nudity,exsplisive language,and toyotas
veiwer discretion advised
18A

shockless
06-03-2005, 12:03 PM
allright i know what you mean about the shocks they have like a stud thing right, anyways i can get the knuckle machined by my friend who works at mearls machine shop what would i have to machine off of it?

__________________________________________________ ______________________
87 F250 300/4.9l/4 speed stock running gear/4:10s
mods: k&n filter,3 inch trailmaster body lift,31's,roll bar, warn manual hubs,
coming soon:
2" susp. lift

shockless
06-07-2005, 07:53 AM
how do i get this piece of shit off? it wont come off i hit it with the bfh i could find with penetrating lube and it still wont come off and what do i ahve to machine off the nuckle?

__________________________________________________ ______________________
87 F250 300/4.9l/ stock running gear/3:54s
mods: k&n filter,3 inch trailmaster body lift,31's,roll bar, warn manual hubs,
coming soon:
in the middle of a sas

Jroc
06-07-2005, 09:51 AM
HIT IT WITH A TORCH ,THEN USE A BIGGER BFH!!!

WARNING!
This site may or may not contain meat or other animal by-products,lewd behavior,breif nudity,exsplisive language,and toyotas
veiwer discretion advised
18A

DURANGO
06-07-2005, 01:29 PM
[drama][drama][drama]

BRONCOS LOVE MUD*****
i love the REDNECK life

shockless
06-08-2005, 06:28 AM
i used like a 18lb sledge hammer or something so just heat it up,. or the bolts coming through?

__________________________________________________ ______________________
87 F250 300/4.9l/ stock running gear/3:54s
mods: k&n filter,3 inch trailmaster body lift,31's,roll bar, warn manual hubs,
coming soon:
in the middle of a sas