PDA

View Full Version : my almost done thread (1.5weeks to go)


Broncoo
05-25-2005, 07:28 PM
yup not to much more to go just finished rebuilding my C6. ordering motor mounts and a aluminum radiator this week then build new steering linkage, exhast and then driveshafts (and a few other minor things)

here's some pics of my dual cases

with stainless steel shift linkage


Image Insert:
http://www.funinbc.com/forum/uploaded/broncoo/200552612615_P5100011.JPG
81.91spudKB

Image Insert:
http://www.funinbc.com/forum/uploaded/broncoo/200552612629_P5100017.JPG
86.18spudKB

Image Insert:
http://www.funinbc.com/forum/uploaded/broncoo/200552612644_P5250019.JPG
61.41spudKB

Image Insert:
http://www.funinbc.com/forum/uploaded/broncoo/20055261270_P5250020.JPG
73.58spudKB

Image Insert:
http://www.funinbc.com/forum/uploaded/broncoo/200552612714_P5250022.JPG
61.34spudKB

i'll get some pics o the engine an stuff later

trying to get where i want to be

for sale:
3 ford np203-205 doubler adapters
REDUCED
$400each OBO!!!

78bronco
05-25-2005, 08:45 PM
what would you charge to do all that work?? and I would suply the transfercases

HELL HATH NO FURY LIKE A BIGBLOCK

Broncoo
05-26-2005, 06:35 PM
too much[b]

trying to get where i want to be

for sale:
3 ford np203-205 doubler adapters
REDUCED
$400each OBO!!!

78bronco
05-26-2005, 06:49 PM
dose the 203-205 adaptor come welded or do I have to get it done?

HELL HATH NO FURY LIKE A BIGBLOCK

Broncoo
05-26-2005, 07:20 PM
i can weld it for you or you can do it

trying to get where i want to be

for sale:
3 ford np203-205 doubler adapters
REDUCED
$400each OBO!!!

BeerBaron666
05-26-2005, 08:02 PM
Geter' done!![36][36][36]

-------------------------------
Anger management pisses me off!!
-----------------------
Image Insert:
http://www.funinbc.com/forum/uploaded/beerbaron666/200516181821_Banner-Bogger-350.jpg
8.24spudKB

shockless
05-28-2005, 03:16 PM
that looks sweet dude, you live in oyama right? where do you work on your stuff?

87 F250 300/4.9l/4 speed stock running gear/4:10s
mods: k&n filter,3 inch trailmaster body lift,31's,roll bar, warn manual hubs,
coming soon:
2" susp. lift

Broncoo
05-28-2005, 03:41 PM
i assemble and fit my stuff at home in the garage and fab whatever i need at work

just picked up my poly stang mounts yesterday

the place i'm gettin my alum rad from is closed for the memeorial day weeken so i can't order it till monday

trying to get where i want to be

for sale:
3 ford np203-205 doubler adapters
REDUCED
$400each OBO!!!

Broncoo
05-28-2005, 03:42 PM
oh yeah workin on a black truck outside in 35C sun kinda sucks bin doin it almost all day time to go drink some beer

trying to get where i want to be

for sale:
3 ford np203-205 doubler adapters
REDUCED
$400each OBO!!!

shockless
05-28-2005, 05:38 PM
wanna help with my sas when i get it all complete? i live in winfield

87 F250 300/4.9l/4 speed stock running gear/4:10s
mods: k&n filter,3 inch trailmaster body lift,31's,roll bar, warn manual hubs,
coming soon:
2" susp. lift

Broncoo
05-29-2005, 09:24 AM
are you stickin with leafs or goin coils?

and yeah i'll lend ya a hand if ya need it

trying to get where i want to be

for sale:
3 ford np203-205 doubler adapters
REDUCED
$400each OBO!!!

shockless
05-29-2005, 11:07 AM
yha im staying with leafs thats what the truxk has and waht the axle has perches for i need some front axle shafts and brakes and a carrier

87 F250 300/4.9l/4 speed stock running gear/4:10s
mods: k&n filter,3 inch trailmaster body lift,31's,roll bar, warn manual hubs,
coming soon:
2" susp. lift

shockless
05-29-2005, 11:08 AM
whats your name by the way?

87 F250 300/4.9l/4 speed stock running gear/4:10s
mods: k&n filter,3 inch trailmaster body lift,31's,roll bar, warn manual hubs,
coming soon:
2" susp. lift

Broncoo
05-29-2005, 05:27 PM
back in the shop
Image Insert:
http://www.funinbc.com/forum/uploaded/broncoo/2005529231650_P5290006.JPG
70.81spudKB

used the hoe to put it in there
Image Insert:
http://www.funinbc.com/forum/uploaded/broncoo/2005529231724_P5290007.JPG
76.21 KB

my new engine with a few things[36]
b]Image Insert:[/b]
http://www.funinbc.com/forum/uploaded/broncoo/2005529231845_P5290008.JPG
62.44 KB



trying to get where i want to be

for sale:
3 ford np203-205 doubler adapters
REDUCED
$400each OBO!!!

shockless
05-29-2005, 05:54 PM
looks good

87 F250 300/4.9l/4 speed stock running gear/4:10s
mods: k&n filter,3 inch trailmaster body lift,31's,roll bar, warn manual hubs,
coming soon:
2" susp. lift

Broncoo
06-02-2005, 06:53 PM
just finished puttin the new engine in had to take the tires off and pretty much rest the front end on the floor

ill take some pics on the weekend

trying to get where i want to be

for sale:
3 ford np203-205 doubler adapters
REDUCED
$400each OBO!!!

and one 36x12.5x15" tsl sx 20% tread $30

shockless
06-02-2005, 07:08 PM
nice got any finished pics?

87 F250 300/4.9l/4 speed stock running gear/4:10s
mods: k&n filter,3 inch trailmaster body lift,31's,roll bar, warn manual hubs,
coming soon:
2" susp. lift

Broncoo
06-02-2005, 07:45 PM
no not yet still have lots to do

trying to get where i want to be

for sale:
3 ford np203-205 doubler adapters
REDUCED
$400each OBO!!!

and one 36x12.5x15" tsl sx 20% tread $30

shockless
06-02-2005, 07:48 PM
allright, im putting in my axle this weekend broncoo i might need some help with steering if your interested

__________________________________________________ ______________________
87 F250 300/4.9l/4 speed stock running gear/4:10s
mods: k&n filter,3 inch trailmaster body lift,31's,roll bar, warn manual hubs,
coming soon:
2" susp. lift

Broncoo
06-06-2005, 06:26 PM
some more progress

in the middle of buildin a tranny crossmember thats why the engine hoist is there thanks boyzen i'll bring some beer or vodka when i bring it back and drink it with ya probly next week sometime

Image Insert:
http://www.funinbc.com/forum/uploaded/broncoo/20056702454_P6060008.JPG
72.93KB


Image Insert:
http://www.funinbc.com/forum/uploaded/broncoo/20056702555_P6060011.JPG
76.07KB

Image Insert:
http://www.funinbc.com/forum/uploaded/broncoo/20056702620_P6060012.JPG
71.42KB

trying to get where i want to be

for sale:
3 ford np203-205 doubler adapters
REDUCED
$400each OBO!!!

and one 36x12.5x15" tsl sx 20% tread $30

78bronco
06-06-2005, 06:49 PM
looking good its closer to being done then mine is.

HELL HATH NO FURY LIKE A BIGBLOCK http://img.photobucket.com/albums/v630/1978bronco/chick.gif

boyzen
06-06-2005, 06:59 PM
thats looking awsome mike I likey.


money costs too much!!!

Broncoo
06-06-2005, 07:55 PM
thanks doods

trying to get where i want to be

for sale:
2 ford np203-205 doubler adapters
REDUCED
$400each OBO!!!

and one 36x12.5x15" tsl sx 20% tread $30

BigC
06-08-2005, 07:15 PM
The get the junk back on the road race is on biatch[49]

78bronco
06-08-2005, 07:31 PM
dont make me come up there with my 557 stroker and kick some ass in racing LOL thats if I can keep the drive shaft in it

HELL HATH NO FURY LIKE A BIGBLOCK http://img.photobucket.com/albums/v630/1978bronco/chick.gif

Broncoo
06-08-2005, 08:07 PM
you got a 557 in your bronco?

me thinks he means race to get our junk finished cuz he don't have anywhere near the power i do

trying to get where i want to be

for sale:
2 ford np203-205 doubler adapters
REDUCED
$400each OBO!!!

and one 36x12.5x15" tsl sx 20% tread $30

78bronco
06-08-2005, 09:44 PM
oh okay, ya Im going to build a 557 stroker the 400M dose not have a big enough parts backing

HELL HATH NO FURY LIKE A BIGBLOCK http://img.photobucket.com/albums/v630/1978bronco/chick.gif

Squishy
06-08-2005, 09:59 PM
that things wicked!

__________________________
1984 Bronco II, 302, NP435,NP208 Doubler, NP205,5.13 Dana 44/8.8 Fullwidth, Detroit, Coil Front, 36" Militarys

Insurance Covers Everything But What Happens.

Got MonoFoam?

crimsen
06-09-2005, 04:47 AM
hey mike, drop the lift off at my place when ur done. gotta do my engine and tranny.

------------------------
79 F150 custom
l/s dana 44 under 4" BDS coils
welded 9" under 4" arched leafs.
4.56 gears
35x16 tsl boggers
351 m with edelbrock performer 400 intake and edelbrock 600 carb
on board air
np 205 T case
np 435 tranny

For Off Road Driving

shockless
06-09-2005, 11:48 AM
crimsen if you need help let me know


__________________________________________________ ______________________
87 F250 300/4.9l/ stock running gear/3:54s
mods: k&n filter,3 inch trailmaster body lift,31's,roll bar, warn manual hubs,
coming soon:
in the middle of a sas

Broncoo
06-10-2005, 06:15 PM
sure thing crimsen phoned your house tonight but you weren't home

here are some more progress pics

tucked the belly as high as i could hangs down about 1"
Image Insert:
http://www.funinbc.com/forum/uploaded/broncoo/200561101111_P6100015.JPG
65.12KB

Image Insert:
http://www.funinbc.com/forum/uploaded/broncoo/200561101154_P6100016.JPG
64.52KB



my new rad had to trim a bit to make it fit
Image Insert:
http://www.funinbc.com/forum/uploaded/broncoo/20056110132_P6100017.JPG
68.29KB

Image Insert:
http://www.funinbc.com/forum/uploaded/broncoo/200561101348_P6100018.JPG
60.05KB[/size=1


fuck thats long
Image Insert:
http://www.funinbc.com/forum/uploaded/broncoo/200561101443_P6100020.JPG
[size=1] 86.09KB


trying to get where i want to be

for sale:
2 ford np203-205 doubler adapters
REDUCED
$400each OBO!!!

and one 36x12.5x15" tsl sx 20% tread $30

boyzen
06-10-2005, 08:51 PM
Looks like fucking monster garage dude!!!!


money costs too much!!!

Broncoo
06-10-2005, 09:24 PM
yeah it's gettin there should be runnin in two weeks (not drivin tho)

trying to get where i want to be

for sale:
2 ford np203-205 doubler adapters
REDUCED
$400each OBO!!!

and one 36x12.5x15" tsl sx 20% tread $30

shockless
06-11-2005, 09:19 PM
looking good broncoo i wanna drop by and check it out one day

__________________________________________________ ______________________
87 F250 300/4.9l/ stock running gear/3:54s
mods: k&n filter,3 inch trailmaster body lift,31's,roll bar, warn manual hubs,
coming soon:
in the middle of a sas
"I lifted my truck cause fat chicks cant climb"

crimsen
06-12-2005, 09:12 AM
ya, i am in cali right now mike. ill be home late mon night tues morning. just drop it off when ever or ill swing by on tues and grab it.

------------------------
79 F150 custom
l/s dana 44 under 4" BDS coils
welded 9" under 4" arched leafs.
4.56 gears
35x16 tsl boggers
351 m with edelbrock performer 400 intake and edelbrock 600 carb
on board air
np 205 T case
np 435 tranny

For Off Road Driving

Broncoo
06-12-2005, 10:15 AM
just swing by an pick er up when ya get back

trying to get where i want to be

for sale:
2 ford np203-205 doubler adapters
REDUCED
$400each OBO!!!

and one 36x12.5x15" tsl sx 20% tread $30

boris
06-17-2005, 06:34 PM
veary f in nice[h]

Broncoo
06-17-2005, 09:29 PM
thanks

update: just been workin on the little things got trans crossmember done picked up a saginaw p/s pump and bracket to upgrade from the stock ford crap,put the vss in mounted up my pass side shock mount been cleanin up my wiring even more makin sure all electrical conections and grounds are in good condition not i'll take some more pics when i get something signifigant done

trying to get where i want to be

for sale:
2 ford np203-205 doubler adapters
REDUCED
$400each OBO!!!

and one 36x12.5x15" tsl sx 20% tread $30

Broncoo
06-30-2005, 06:50 PM
here is a few more been dooin all the nickel and dime stuff lately

plus fabbin stuff (which takes time cuz i haveta do it at work 20min away)

Image Insert:
http://www.funinbc.com/forum/uploaded/broncoo/20057104827_Jun26-2005 001.jpg
71.77KB

Image Insert:
http://www.funinbc.com/forum/uploaded/broncoo/20057104911_Jun26-2005 003.jpg
63.29KB

gonna be orderin some 1410 yokes from northwest fab next week and the tie rod reamer as well also gonna be gettin the rest of what i need to fire the engine up[36]

Image Insert:
http://www.funinbc.com/forum/uploaded/broncoo/20057104928_Jun26-2005 005.jpg
74.24KB

trying to get where i want to be

for sale:
2 ford np203-205 doubler adapters
REDUCED
$400each OBO!!!

boyzen
06-30-2005, 07:32 PM
nice work its looking like you won't get er dirty.


money costs too much!!!

Broncoo
06-30-2005, 09:04 PM
you mean won't get er dirty as in no wheelin season left[V]

i'll probably toss it on the road for a month when it's done...whenever the fuck that may be

goin to be buyin a house soon too been lookin at tons of em

i'm gonna come out to postil on saturday for a bit so i'll see ya then

trying to get where i want to be

for sale:
2 ford np203-205 doubler adapters
REDUCED
$400each OBO!!!

Broncoo
07-16-2005, 11:02 AM
time to post more pics engine runs it's a very happy sounding motor
picked up my tie rod and drag link ends today

gonna be finished before i move into the house i just bought so 4-6weeks max

Image Insert:
http://www.funinbc.com/forum/uploaded/broncoo/200571616596_progress july 16 001.jpg
72.22KB

Image Insert:
http://www.funinbc.com/forum/uploaded/broncoo/2005716165920_progress july 16 003.jpg
62.73KB
here is the saginaw power steering from a 88 ford fulsize van no modifications needed to make it fit
Image Insert:
http://www.funinbc.com/forum/uploaded/broncoo/2005716165932_progress july 16 004.jpg
47.88KB

Image Insert:
http://www.funinbc.com/forum/uploaded/broncoo/2005716165953_progress july 16 005.jpg
51.11KB
the intake tube you see here colapses at about 4000rpms due to the mass air sensor being restrictive so i will make something else
Image Insert:
http://www.funinbc.com/forum/uploaded/broncoo/20057161709_progress july 16 006.jpg
65.95KB

trying to get where i want to be

for sale:
1 ford np203-205 doubler adapter
REDUCED
$400 OBO!!!

nitrous
07-16-2005, 11:08 AM
looking good

clevis
07-16-2005, 03:46 PM
What are you using for the wiring harness and computer?

Broncoo
07-16-2005, 04:24 PM
i'm usina painless harness and a comp from a 5spd mustang i may switch the comp to a A9L from an auto mustang tho (better engine controls)

trying to get where i want to be

bakelite
07-17-2005, 01:51 AM
looking great, nice work on a nice rig, thanks for the progress reports and pics.[cheers]













send money

Broncoo
07-17-2005, 02:49 PM
thanks guys

trying to get where i want to be

4xry
07-18-2005, 10:17 PM
Man, that fan shroud/mount is fawkin nice man. Are your radius arm mounts homemade? if so can you post a close up of em. The whole rig looks fawkin sexy, that doubler looks prety trick too. Keep it up man, lookin damb good.

shockless
07-19-2005, 07:09 AM
hes got a doubler for sale i think...

__________________________________________________ ______________________
87 F250 300/4.9l/ stock running gear/3:54s
mods: k&n filter,3 inch trailmaster body lift,31's,roll bar, warn manual hubs,
coming soon:
in the middle of a sas
"I lifted my truck cause fat chicks cant climb"

Broncoo
07-19-2005, 01:23 PM
nope not anymore sold the last one to goatz and boyzen has claimed the other one

and yeah i made the rad arm mounts the bushing part is angled to keep the bushings unloaded at ride hieght hopefully will gain some travel from that



trying to get where i want to be

Broncoo
07-28-2005, 05:59 PM
yup got some driveshafts cut/legthened from mudram took the truck for a rip and managed to bust a power steering hose while i was down at my neighbors beach access not very fun driving it back up my field with no p/s

what good is it if you can never think of what to put here

Stepside
07-28-2005, 06:26 PM
Truck look sweeeet man [36][36][36]
Did you wrist the radius arm?

NEED CARB !!!!

Broncoo
07-28-2005, 06:55 PM
thanks and yup i sure did wrist the arm flexes gooder

what good is it if you can never think of what to put here

Broncoo
07-30-2005, 08:52 AM
here's some pics from this mornin got a new p/s hose lotsa room t

Image Insert:
http://www.funinbc.com/forum/uploaded/broncoo/2005730144914_July 30 2005 001.jpg
89.26KBhis time

Image Insert:
http://www.funinbc.com/forum/uploaded/broncoo/2005730145038_July 30 2005 003.jpg
80.89KB

Image Insert:
http://www.funinbc.com/forum/uploaded/broncoo/2005730145118_July 30 2005 005.jpg
73KB

Image Insert:
http://www.funinbc.com/forum/uploaded/broncoo/2005730145248_July 30 2005 006.jpg
86.7KB

what good is it if you can never think of what to put here

Broncoo
07-30-2005, 08:54 AM
oh yeah now woith the 4:1 it idles everywhere

what good is it if you can never think of what to put here

G-rizzle Swank
07-30-2005, 09:14 AM
wicked job bud! is that a dry sump you have there?




They dont call me the Swank for nothin.......

Wait.. maybe they do

Broncoo
07-30-2005, 09:50 AM
what dry sump oil system fawk no i don't have the cash to set somthing like that up that's my tranny cooler in front of the rad

what good is it if you can never think of what to put here

Goatz
07-30-2005, 01:53 PM
awww man that thing is sweet i cant wait to get that doubler in my truck oh i should be sending the money on either tues or wednesday, oh i just bought a new motor for my beast a 4.6l triton v8 it should be sweet i cant wait when she is done i will have to come up there and go wheelin with ya

BAH BAH says the Goat

Broncoo
08-01-2005, 06:36 PM
yeah you will like the 4:1 that 4.6l is a monster


what good is it if you can never think of what to put here

78bronco
08-01-2005, 06:39 PM
sweet job wish mine was done

HELL HATH NO FURY LIKE A BIGBLOCK

sj-x 500
08-01-2005, 07:18 PM
fuck man, lookin good! what's left?

Zuk's on Ice.

Broncoo
08-01-2005, 07:47 PM
another trans crossmember to support the 205, a traction bar and limiting strap for the rear
a brace for the panhard bar mount, pickup my drag link and tie rods from mudram, make the shifters for the
t-case and get the exhaust done

so ya the list is gettin shorter everyday

i managed to stretch the ears on the pass d44 stub shaft luckily i have spares (al i was doin was fuckin around in 4:1 in my yard)

what good is it if you can never think of what to put here

Drewbie
08-01-2005, 08:07 PM
man that thing is awsome, look forward to seeing ya down sept long man!

Broncoo
08-02-2005, 02:01 PM
i'll be down but probly not bringin the bronc

what good is it if you can never think of what to put here

Goatz
08-04-2005, 06:19 PM
yup i t should be sweet def have to come up there to do some wheelin when its done

BAH BAH says the Goat

boyzen
08-04-2005, 06:35 PM
I wanna bring my truck to sept long but cannot drive it that far .

Sex is like a drug! It makes me feel funny!

Broncoo
08-04-2005, 06:37 PM
i'll have room for ya in the exploder chris if ya need it

what good is it if you can never think of what to put here

broncorandy
08-07-2005, 09:32 AM
Nice to see it moving on all 4 now Mike. You did an awsome job,
my bronco is still dead after postil but when I get her going
again we should head out for a run.

broncorandy
08-07-2005, 09:34 AM
Is your new place still in lake country.

Broncoo
08-07-2005, 02:55 PM
no new house is in rutland only 4kms to work and i have a shop of my own now

what good is it if you can never think of what to put here

Broncoo
08-11-2005, 05:29 PM
actually only 3.7kms to my new house from work gonna save me a few hun$ in gas

here's a couple more not in the garage anymore



Image Insert:
http://www.funinbc.com/forum/uploaded/broncoo/2005811231846_bronco aug 4 2005 001.jpg
81.6KB

Image Insert:
http://www.funinbc.com/forum/uploaded/broncoo/200581123193_bronco aug 4 2005 002.jpg
81.26KB

picked up the steering links from mudram this week props to ya man good stuff

also made a brace for the panhard mount

now i'm tryin to find a exhaust shop that will do my truck for cheap the cheapest iv'e found so far is $400 and i supply the muffler

all my truck needs is a 2" Y-pipe with about 4bends then a 2x2"into 3" collector 45"of 3"straight to the muffler then 38" from the muffler back with three bends in that

once i get that done i'm gonna stop workin on it for a bit till i get some other important things done (all the stuff that needs to be done is cheap and will be made by me) and it WILL!! Be ready for next season

all in all i wish i coulda got er done for at least part of the season but that didn't happen so i'll run er good next year then look for a fullwidth 60 front then it's gettin some tubework

what good is it if you can never think of what to put here

Goatz
08-11-2005, 06:12 PM
SWEEEEET

BAH BAH says the Goat

hornythrony
11-23-2005, 03:46 PM
hey just bought your doubler off of 78bronco so will be putting it in once i get myshaft shorten but n e farther on your truck?

its a fullsize thing! jeep owners just wont understand :p

Broncoo
11-27-2005, 03:09 PM
no iv'e been workin on my house too much i'll finish it in febuary when i get back from school

fawk all left to do tho

he who dies with the most toys still dies