PDA

View Full Version : h


C-Dog
05-25-2005, 06:32 AM
Hello everybody i was just wundering if any one in this room makes rear spring hangers for a older chev a blazer is what i wnt them for so if u can get back to me that would be great thanks :D[cheers]

shockless
06-03-2005, 02:05 PM
they arent hard to make

__________________________________________________ ______________________
87 F250 300/4.9l/4 speed stock running gear/4:10s
mods: k&n filter,3 inch trailmaster body lift,31's,roll bar, warn manual hubs,
coming soon:
2" susp. lift

ottoman
06-22-2005, 08:13 AM
i wor at carrier spring in abby by the college and we make all kinds of brackets there and for decent prices
we build most of them out of 3/8" plate so their good and strong to
give us a call 604-855-9982 or check us out at www.customsuspension.com

shockless
06-27-2005, 08:59 PM
i made my rear shackle flip in metal class, took about a day to make the rear brackets and everything i used 3/8s for the bvacking plate then welded rectangulra tubing that was made to fit in for support

Image Insert:
http://www.funinbc.com/forum/uploaded/fordi64x4/200562825914_shackle.jpg
5.97KB

kinda like that

__________________________________________________ ______________________
87 F250 300/4.9l/ stock running gear/3:54s
mods: k&n filter,3 inch trailmaster body lift,31's,roll bar, warn manual hubs,
coming soon:
in the middle of a sas
"I lifted my truck cause fat chicks cant climb"