PDA

View Full Version : Moog TRE are junk- who sells Spicer Gold locally?


m j
05-08-2005, 10:50 AM
anyone?

how does the threaded shank of the TRE get bent?
they must assemble/press the ball after threading.
the thread posted on Pirate came back with as high as a 50% rate of problems on Moog TRE
Lordco does not stock enough es2026 es2027, es2233, or es2234 to pick through and find straight ones.

the bent ones will not thread into my fabbed draglink or tierod
kinda pissed at the time I wasted incorrectly and repeatedly looking for tap problems.

_________________________
I am trying to feel sorry for you but I just can't seem to do it.

78bronco
05-08-2005, 11:01 AM
do you have the GM part number I can ask my freind at the GM parts counter how much they cost if you want

HELL HATH NO FURY LIKE A BIGBLOCK

m j
05-22-2005, 05:39 PM
I had Lucas at Lordco MR bring in 4 of each Moog so I could hold a straight edge to them to find 1 of each that was straight

_________________________
I am trying to feel sorry for you but I just can't seem to do it.

black442
05-23-2005, 07:00 PM
try danco industries in port kells(surrey)

81 chev 3/4 ton on 35's. going bigger soon

m j
05-23-2005, 07:15 PM
good call
I buy all my spicer u joints from them

_________________________
I am trying to feel sorry for you but I just can't seem to do it.

black442
05-26-2005, 06:50 PM
I work right across the street from them. If they don't have it, they can get it quick!!!

81 chev 3/4 ton on 35's. going bigger soon

In The Zone
06-01-2005, 04:33 PM
He posted the GM #'s

i have not had a problem with the ones i have



HMMMMMMM
ITS a FORD

m j
06-01-2005, 04:47 PM
are you putting them into threaded tube or stock type stuff?

_________________________
I am trying to feel sorry for you but I just can't seem to do it.

In The Zone
06-01-2005, 08:07 PM
Custom draglink and tierod care of Tle

Image Insert:
http://www.funinbc.com/forum/uploaded/in the zone/2005622556_draglink2.jpg
36.04KB

HMMMMMMM
ITS a FORD

shockless
06-03-2005, 02:04 PM
i need to make one of those for my new axle

__________________________________________________ ______________________
87 F250 300/4.9l/4 speed stock running gear/4:10s
mods: k&n filter,3 inch trailmaster body lift,31's,roll bar, warn manual hubs,
coming soon:
2" susp. lift

MudRam
06-09-2005, 02:05 AM
quote:Originally posted by In The Zone

Custom draglink and tierod care of Tle

Image Insert:
http://www.funinbc.com/forum/uploaded/in the zone/2005622556_draglink2.jpg
36.04spudKB

HMMMMMMM
ITS a FORD





How much did the hi-steer arms set u back??....thats the only way to make them for a d44

86 Dodge s/b 440/727/205...The rest is custom
If you cant DODGE it...RAM it!!!
If its not "SLIGHTLY MODIFYED" its not mine