PDA

View Full Version : windshield


Legend
04-27-2005, 10:19 PM
I have a truck with a windshield i want to take out and put in my bronco but idunno where to even start going about getting it out let alone in - Ive heard of people using wire and feeding it threw the seal and pulling it all the way around to cut the seal but really i have no idea[?][?][?]

ITS A GREAT COMBO AT ANY PRICE!!!!

HEAVY METAL
04-27-2005, 10:40 PM
i can do it for ya....pm me ur number Kyle [cheers]

-----------------------


JESUS DID IT FOR THE CHICKS

crimsen
04-28-2005, 03:56 PM
to take it out, razor knife around the edge of the trim, and push gently outwards. if ya wanna save both, (quite hard) peel the flap of rubber down on the inside, (pic 1) start near middle, and use a flat head screwdriver to kinda push it out windshield,(pic 2)(brown thing = screwdriver) and then tuck the rubber behind it,(pic 3) and work around. usually you will crack the glass tho, unless very carefull. also, all you need to do is 2 sides, like top and either left or right, and then just wiggle it and it should pop out.

have done this successfully on one windshield, but cracked the second one (was also rushing a lil and was already cracked so didn't care alot) have removed 3 rear slider windows with same technique.


Image Insert:
http://www.funinbc.com/forum/uploaded/crimsen/2005428205353_pic 1.JPG
18.94KB

Image Insert:
http://www.funinbc.com/forum/uploaded/crimsen/2005428205359_pic 2.JPG
11.16KB

Image Insert:
http://www.funinbc.com/forum/uploaded/crimsen/200542820547_pic 3.JPG
10.52KB

------------------------
79 F150 custom
l/s dana 44 under 4" BDS coils
welded 9" under 4" arched leafs.
4.56 gears
35x16 tsl boggers
351 m with edelbrock performer 400 intake and edelbrock 600 carb
on board air
np 205 T case
np 435 tranny

For Off Road Driving

Stupiduki
04-28-2005, 04:47 PM
THATS THE FUNNIEST THING IVE EVER SEEN YOU AUTOGLASS WIZZARD

HAVE YOU BEATEN A SUZUKI LATLEY

sj-x 500
04-28-2005, 04:54 PM
k.. dude. there is a tool. it's like 2 bucks. it's a plastic "bone", 6 inches long, 1/2 inch wide. slide it under to break the seal of glue.
i like to push the windows out with my foot, slow steady pressure.

to go in, rope around the window, push from the out side, while someone inside pulls the rope out, which pulls the seal over the lip, done.

Zuk's on Ice.

Pegleg
04-28-2005, 05:39 PM
piano wire

---------------------- gear down big rig

Hyenuf
04-28-2005, 07:30 PM
save yourself some aggravation



Get Heavy todo it... it's that thing he does..... offer him beer:D

http://www.funinbc.com/forum/uploaded/hyenuf/200541913836_Hyenufrules.gif
IF IT AIN'T BROKE........ DON'T FIX IT!

IF IT'S TTB...TRUST ME...IT'S BROKE!!!

HEAVY METAL
04-28-2005, 07:41 PM
sorry crimsen..that was THE fukin funniest shit i have seen in a long time.. his w/s is urethaned in. i'm a certified journeyman autoglass guy.....ya i know...who fukin cares..anyway i have the tools, urethane, and know how...is all worked out...



Crimsen...A for effort buddie...






























still laughin...[15][15][15][15][15][15]

-----------------------


JESUS DID IT FOR THE CHICKS

pistnbroke
04-28-2005, 07:46 PM
Take a rock and smash it then go pay the 200 deductable
and get a new one.

Legend
04-28-2005, 08:45 PM
yea i had planned to get heavys help to do it like he said hes certified[36] and likes beer[31][31]

ITS A GREAT COMBO AT ANY PRICE!!!!

T-donk
05-05-2005, 11:20 AM
i think heavy might break it he has been out of it too long
better let me do it kyle[22][22][22][f]

________________________

Go DEEP or Go HOME!!