PDA

View Full Version : T-case gears


All_sammi
03-27-2005, 05:09 PM
Ive made the choice to spend some cash and get 4-1 gears for my truck. (time to crawl) where would be the place to get these, what will it cost, is it possiable to put them in myself or what. would lordco be able to get them in. Or [f] Tom, what would you want??

87 Samurai
Rear leafs in front, Coils in back
Sammi axles with 5.13, Lock-Rite in Rear
32" Tsl Sx High steer & Rancho 9000's

barracuda
03-27-2005, 05:56 PM
Mike would be the guy to talk to.(CJ Mike) I think he would also get you about the best deal around for those parts also

http://www.funinbc.com/forum/uploaded/barracuda/card.gif

"A level" mobile welder
mig,tig,alum spool,stick
rates start at $65 an hr
welder rental from $125 per day


The way to a mans heart is through his zipper!!!

jeeper
03-27-2005, 06:28 PM
He used to be cjmike ----Now hes sammimike !



He went over to the dark side !

All_sammi
03-27-2005, 06:41 PM
hey im glad to hear that some of you guys acualy let go and get far far away from those heeps[f] to bad for the rest[16]

87 Samurai
Rear leafs in front, Coils in back
Sammi axles with 5.13, Lock-Rite in Rear
32" Tsl Sx High steer & Rancho 9000's

jeeper
03-27-2005, 06:48 PM
If you only knew !

cjMike
03-28-2005, 03:04 AM
4.16 5.14 6.5 are the gear sets i can bring in.What tire size you gonna run?[cheers]



THE NEEDLE TEARS A HOLE
THE OLD FAMILIAR STING

cjMike
03-28-2005, 03:12 AM
Oh and by the way youll need to upgrade the transfer case mounts aswell. The lower gears wreek havoc on the factory mounts!



THE NEEDLE TEARS A HOLE
THE OLD FAMILIAR STING

All_sammi
03-28-2005, 04:50 PM
cjmike i would get the 4.16. What brand can u get, are these new or used gears? also is it possable to set up at home or is it to complex? how much $$$$? how long would it take to bring these in.

87 Samurai
Rear leafs in front, Coils in back
Sammi axles with 5.13, Lock-Rite in Rear
32" Tsl Sx High steer & Rancho 9000's

cjMike
03-28-2005, 06:28 PM
Ill check pricing on the gears tues .They are brand new and you can out them in in a bout 4 5 hours !Might want to talk to Stranger and get Tom to do the install![cheers]



THE NEEDLE TEARS A HOLE
THE OLD FAMILIAR STING

cjMike
03-28-2005, 06:30 PM
Oh and by the way Jeeper my cj WILL be back up and running soon![redneck]



THE NEEDLE TEARS A HOLE
THE OLD FAMILIAR STING

EIEIO
03-29-2005, 06:16 PM
Can you post the prices on here?

________________________

85 SJ413 Chopped & Decked, Locked & Loaded!


www.bczukis.com

cjMike
03-29-2005, 08:38 PM
Well the prices on the 4.16 kit from California Mini Truck are as follows,$760.00 for the gear kit and $208.00 for the brg kit !Do as i did and GET the brg kit as all items to completely rebuild it are in there ![cheers]



THE NEEDLE TEARS A HOLE
THE OLD FAMILIAR STING

All_sammi
03-29-2005, 08:55 PM
[cheers] thanks But now im not sure if im gonna swap the gears in the case or i might get a 1.6 16V[36]. Not sure which to chose, just put a centerforce cluch on the 1.3[27] but would really like the 120 Km.+[h] & EFI. any sugustion.[11] Did you say that you got the 4.16 for your truck

87 Samurai
Rear leafs in front, Coils in back
Sammi axles with 5.13, Lock-Rite in Rear
32" Tsl Sx High steer & Rancho 9000's

sj-x 500
03-30-2005, 05:48 AM
get gears first, then power.

power without gears.. you may as well be driving a chev ;)

the 1.6 16v is a lot more then the gears too.

Zuk's on Ice.

tazuki
03-30-2005, 06:16 AM
Sent you a PM ... I got one redy to go with Calmini gears... quote:Originally posted by All_sammi

Ive made the choice to spend some cash and get 4-1 gears for my truck. (time to crawl) where would be the place to get these, what will it cost, is it possiable to put them in myself or what. would lordco be able to get them in. Or [f] Tom, what would you want??

87 Samurai
Rear leafs in front, Coils in back
Sammi axles with 5.13, Lock-Rite in Rear
32" Tsl Sx High steer & Rancho 9000's


"What for you bury me under the cold cold ground"

sj-x 500
03-30-2005, 06:32 AM
you're sellin your t-case taz?!

Zuk's on Ice.

tazuki
03-30-2005, 06:34 AM
Yup ! Going lower ! [cheers]

"What for you bury me under the cold cold ground"

All_sammi
03-30-2005, 04:40 PM
I agree gears then Hp. But can get a good deal(i think) on motor right now and originaly wanted to get a 1.6 but now i came across this one[27] anyone know if the 16V & 8V have the same bolt pattern on the bellhousing? will it bolt up to the sammurai trans

87 Samurai
Rear leafs in front, Coils in back
Sammi axles with 5.13, Lock-Rite in Rear
32" Tsl Sx High steer & Rancho 9000's

tazuki
03-30-2005, 05:28 PM
U will need an addaptor for either one !!!
http://www.puresuzuki.com/1600cc_bolt-in.htm

"What for you bury me under the cold cold ground"

EIEIO
03-30-2005, 05:39 PM
Taz - how much?

________________________

85 SJ413 Chopped & Decked, Locked & Loaded!


www.bczukis.com

tazuki
03-30-2005, 05:47 PM
9 and your T-case [cheers]quote:Originally posted by EHeye

Taz - how much?

________________________

85 SJ413 Chopped & Decked, Locked & Loaded!


www.bczukis.com


"What for you bury me under the cold cold ground"

cjMike
04-19-2005, 12:27 PM
Hay Taz what gears are you going ?Or is it a secret?[Shhh]

I WAS IN A CAR CRASH OR WAS IT THE WAR ? BUT IVE NEVER BEEN QUITE THE SAME

sj-x 500
04-19-2005, 07:41 PM
i dunno, but it'll take him a while to sell a used 4:1 at 9 + a case.

Zuk's on Ice.

EIEIO
04-20-2005, 05:51 AM
No doubt. Thats a little steep, I think I will just get the stuff myself.

________________________

85 SJ413 Chopped & Decked, Locked & Loaded!


www.bczukis.com

tazuki
04-21-2005, 09:15 AM
I'm not realy worried about it! , It can just sit in my shed untill someone wants it and makes a good offer! [cheers][cheers][cheers]

"What for you bury me under the cold cold ground"

EIEIO
04-21-2005, 12:41 PM
Case of beer and some pocket lint?? [16]

________________________

85 SJ413 Chopped & Decked, Locked & Loaded!


www.bczukis.com