View Full Version : power steering conversions on eb

68 bronco
02-18-2005, 01:24 PM
Looking for advise for power steering swap into my early bronco.

02-18-2005, 01:43 PM
now you need power steering for the 38's?

anything can be fixed with a chainsaw a hammer some ratchet straps and duct tape.

02-18-2005, 01:59 PM
did you get rid of your 38s darryl???

I don't give a fuck, I don't know what a fuck is to give it.

02-18-2005, 02:01 PM
yup, i hope he's happy they are great tires.

anything can be fixed with a chainsaw a hammer some ratchet straps and duct tape.

68 bronco
02-19-2005, 04:32 AM
I needed power steering before the 38's, they were just around at the right time.

02-20-2005, 05:47 AM
What kind of advise do you need. Let me know I could probably help.[chugging]

Fords Kick Ass

68 bronco
02-21-2005, 03:04 PM
I was more or less looking for input on different setups. I was thinking about late 70's f150 4x4 box with the 4x2 worm gear/rack swapped into it. How reliable is this setup, or any better ones out there?

02-27-2005, 12:10 PM
[chugging]The only problem you'll have with a late 70's box is the pitman arm is pointing forward as the 76-77 bronco box is pointing to the rear, so in less you have alot of room for the 70's box your steering link is going to stick out alot and throw your center of steering off. I would try to find a 76-77 bronco box setup[?]

72 F100 4x4 36" Swampers 3" body 4" susp Locked front 79 bronc front diff conv 390 V8 Np205/435 comdo

02-27-2005, 12:41 PM
make sure to use a sagnaw powersteering pump and not one of those shity ford ones. Im in the middle of swaping out the stock ford pump and putting a sagnaw in. You can get the brackets off a ford van!!


03-06-2005, 05:27 AM
try steering solutions in port kells :)

ps and use a high presure ,high volume saggy pump not just any one you find