PDA

View Full Version : damm 4lo


spanky
01-20-2005, 06:58 AM
damm 4lo ok so I can get the truck in 4hi but for some reason it wont go in 4lo anyone ever have this problem or know what the problem might be[cheers]



So I like to be SPANKED!!! Is that a problem?????


When in doubt, just punch em in the f*ckin throat!

agirlstoy1@hotmail.com

brandonf250
01-20-2005, 07:17 AM
i had a 205 t-case in my chevy and always had a problem getting it in to lo-range?,not sure what t-case your truck has.

spanky
01-20-2005, 04:39 PM
ok well after playing with it for awhile i can get it into 4lo but the truck has to be in park with the e-brake on



So I like to be SPANKED!!! Is that a problem?????


When in doubt, just punch em in the f*ckin throat!

agirlstoy1@hotmail.com

sj-x 500
01-20-2005, 04:48 PM
often with auto's you gotta be in neurtal with the brakes on.

Zuk's on Ice.

In The Zone
01-20-2005, 06:43 PM
yup most auto trans or elctronic shift or manualshift with auto trans u must be below 20km and in neutral..
for engagment of 4 lo it is not sycronized so the shift can be rather hard if u are moving .....
best bet hold the brake and shift in to neutral then engage 4lo

could be a stiff gate as well.

Soon to be on a trail near U

dexter302
01-20-2005, 08:41 PM
hit it with a hammer.....that should fix it...

This space for rent
..._______
../_______\
.(]]__o__[[)
|\_o ___o_/|
|_|.........|_|

.............//)
..........,/../ /
........./..../ /
....//'...'/.`
./'/.../..../.....:^.\
('(.......... _/'...'/
\.................'...../
.'\'...\.......... _.
...\..............(
....\..............\

chevy69chevelle
01-20-2005, 11:30 PM
my blazer didn't go into 4 low cause the lift on the body, the transfer case shifter hit the floor before it engages... but that's prolly not what ur problem is