PDA

View Full Version : need engine/tranny compatability info


Fuzzydog
11-09-2004, 08:44 AM
Ok, here's my thing
I've got a 1964 Landrover that is stripped to the frame and I have sold the axles, tranny, etc.
I've got axles (D44 front, 9" rear), tranny (T18 I think), and NP205 t case from a 79 Bronco to go under the Landrover frame.

I just like the brutish ugliness of the rover, ok? Besides, it's so square that replacing panels should be a piece of cake :D

Anyhoo, my powerplant is a carbed 302 - I have no idea of the year. I want the 302 because this is going to be an expedition truck and I like the widely available parts for 302, and I've had em before and trust em.

The Bronco had a 351M which I sold. I need a bellhousing to go between the 4 spd and the 302. Autowreckers seem to be having difficulty with this concept.
Didn't any Ford trucks come with a 302 and 4 speed?
If you know of any, please let me know so that I can tell the wrecker lads which year to look up.

Thanks

STranger
11-09-2004, 08:52 AM
super common.300ci i6 and 289,302,351w are all the same.if you want mechanical clutch,look for pre 82,aftre that is hydraulic.i have the mech clutch bell here.

i dont need people to get me,i just need people to get out of my way

boyzen
11-09-2004, 02:41 PM
Hey fuzzydog do you happen to have the rover control arms for the front axle do ya?

Image Insert:
http://www.funinbc.com/forum/uploaded/boyzen/20049132203_ani6.gif
25.13spudKB

Fuzzydog
11-09-2004, 02:42 PM
BTW - how much would you want for the bellhousing, I'd rather give someone on this board the business...

STranger
11-09-2004, 03:01 PM
you can have the bell i've got for $40,where are you?

i dont need people to get me,i just need people to get out of my way

STranger
11-16-2004, 07:38 AM
bell is going on the bus right now.

i dont need people to get me,i just need people to get out of my way