PDA

View Full Version : transfer case??


lizard
07-19-2004, 04:26 PM
81 gmc 3/4 ton . 350, turbo 400. not full time 4wheel drive

I heard these usually have 205's or 203's. I looked at the tag an it says 208.

Is it???




Image Insert:
http://www.funinbc.com/forum/uploaded/lizard/2004719222534_truck 001.jpg
35.52spudKB

Image Insert:
http://www.funinbc.com/forum/uploaded/lizard/2004719222544_truck 002.jpg
38.77spudKB

Image Insert:
http://www.funinbc.com/forum/uploaded/lizard/2004719222554_truck 004.jpg
53.32spudKB

Image Insert:
http://www.funinbc.com/forum/uploaded/lizard/200471922264_truck 005.jpg
46.9spudKB

Image Insert:
http://www.funinbc.com/forum/uploaded/lizard/2004719222613_truck 006.jpg
50.79spudKB

lizard
07-19-2004, 05:34 PM
Is 208 better or worse than 205?

Broncoo
07-19-2004, 05:40 PM
has a better low range 2.61:1 an all aluminum case, chain drive and they all have a slip yoke output it should be okay if ya don't hammer on it or bash it on rocks

the 205 is way stronger
so is the np203

it's light it's fast it's powerful

everything a chevy isn't

phatmatt
07-19-2004, 05:51 PM
203s and 205s have steel cases and are gear driven.

Where am I?

u2slow
07-19-2004, 07:59 PM
203 is chain [1d]

STranger
07-20-2004, 03:27 AM
the 208 is a good strong case with a decent low.keep clean oil in it and it will take a lot of abuse.one thing though,if you lose your rear shaft dont beat on it with only the front hooked-the housing WILL break!

i dont need people to get me,i just need people to get out of my way

In The Zone
07-20-2004, 07:11 AM
Hmmm kinda like my problem LOL

It' a FORD need I say More.....It drinks lots of Gas,Chews Tire's and eat's BUSH

Locked and sittin on 36"tsl SuperSwampers

STranger
07-20-2004, 08:35 AM
you are lucky that the t case didnt break.the newer trucks cant take the whole torque load on the front.

i dont need people to get me,i just need people to get out of my way

barracuda
07-20-2004, 09:09 AM
I have not had any issues with mine, and not all NP208s are slip yoke design , just make a good skid plate cause the aluminium is not to impact resistant ,

"A level" mobile welder
migImage Insert:
http://www.funinbc.com/forum/uploaded/barracuda/200361401938_scan0001.jpg
32.46 KB

,tig,alum spool,stick
rates start at $65 an hr
welder rental from $125 per day

The way to a mans heart is through his zipper!!!

1_ton_k5
07-20-2004, 11:26 AM
All the Chev 208's were slip yoke. You need Dodge parts to SYE the chev version.

Rene

81K5,6.2,465,205,60,14,4.56,40's

barracuda
07-20-2004, 11:31 AM
my ford is another one without a slip yoke. (300 six,6.69 NP435-NP208) It seems some were slipyoke and some were not.

"A level" mobile welder
migImage Insert:
http://www.funinbc.com/forum/uploaded/barracuda/200361401938_scan0001.jpg
32.46 KB

,tig,alum spool,stick
rates start at $65 an hr
welder rental from $125 per day

The way to a mans heart is through his zipper!!!

phatmatt
07-20-2004, 12:04 PM
quote:Originally posted by u2slow

203 is chain [1d]


I DIDN'T MEAN THE 203 JUST THE 205[1d]

Where am I?