PDA

View Full Version : pinon seal


radar
06-20-2004, 06:35 PM
i have a question R ear dana 70 , to fix a pinon seal is there a crush sleave i will have to change or just tourk the yoke to spec s a gane ???I would post in the dodge section but there is none [3]

The more people I meet the more I like my dogs.

boyzen
06-20-2004, 08:21 PM
nope there is no crush sleave they are shimed to spec for the bearing preload . so just torque it to 200 ft lbs and check if it spins at 25 inch lbs.

BOGGERS RULE!!!!:
http://www.funinbc.com/forum/uploaded/boyzen/20044611514_IntercoShield.jpg

[/img]http://www.therangerstation.com/files/RevolvingFordLogo.gif

radar
06-21-2004, 08:54 PM
i have a nuther question .. the big nut can you use heat to remove it ?????[3]

The more people I meet the more I like my dogs.

barracuda
06-21-2004, 09:17 PM
no!!!

"A level" mobile welder
migImage Insert:
http://www.funinbc.com/forum/uploaded/barracuda/200361401938_scan0001.jpg
32.46 KB

,tig,alum spool,stick
email me if you want some work done

The way to a mans heart is through his zipper!!!

radar
06-21-2004, 09:29 PM
ok ok no heat then how the fu-- do you breake it lose

The more people I meet the more I like my dogs.

barracuda
06-21-2004, 10:00 PM
big ass cheater bar (several feet long) that is how i break mine . It also helps to have a 1 in drive socket set (1/2 in tend to shear). be carefull if you use an impact as it can shatter the gears.

"A level" mobile welder
migImage Insert:
http://www.funinbc.com/forum/uploaded/barracuda/200361401938_scan0001.jpg
32.46 KB

,tig,alum spool,stick
email me if you want some work done

The way to a mans heart is through his zipper!!!

In The Zone
06-22-2004, 11:59 AM
:D Ken the pinion nut is a real pig to loosen ;)

like they said use a GOOD quality wrench or Socket cause they are torqued tight.....[:0]

set your parkbreak on and block the wheels then lean on her with the biggest lever u got...

this is why a hoist is nice cause then u got lots of room...

Good luck[3]
If ya already did it disregard this....

It' a FORD need I say More.....It drinks lots of Gas,Chews Tire's and eat's BUSH

Locked and sittin on 36"tsl SuperSwampers

radar
06-22-2004, 05:38 PM
hey it worked big ass bar and shes loose thanks guys were good to go now[3]

The more people I meet the more I like my dogs.