View Full Version : What axles do i need?
05-05-2004, 12:40 PM
I have a 93 f-150 with a 460 big block, 17 inch lift and 39.5 x 18.5 inch boggers, only problem is i have the stock f-150 axles. What do i need to get to run without problems in terms of axles and gear ratios?
05-05-2004, 01:18 PM
Try a high pinion d60 front with 4:56 gears or 5:29's in the front. Another d60 for the rear, or better yet a d70 or corp 14. Or if you want to go for some real fun, get some mog axles.
not all men are pigs
some men are gay
05-05-2004, 04:39 PM
Ya what Okor said, thats some power and lots of tire so bigger is always better
"It's not a fire untill your scared of it" -Stave proverb
"I see your using one of the better tasting glues" - Kelso
http://www.click-smilie.de/sammlung0903/spezial/Sarge/MrT_anim.gifThat don't cheer for the RedWings
05-05-2004, 05:22 PM
youve got daytons old truck. go with a dana 60 and 14bolt or 10.25
90 Ford F150
05-05-2004, 05:25 PM
if you go with an older style(70's) you can remove the leaf pearches and weld on the c tabs and re-use the coil sprung setup. its a lot harder to set up the coils on a newer dana 60 as i have.
90 Ford F150
05-06-2004, 02:35 PM
do not go older than "78 dana 60 front.
vBulletin® v3.6.4, Copyright ©2000-2017, Jelsoft Enterprises Ltd.