PDA

View Full Version : LocashMikey


Tuner Inside
02-20-2003, 08:47 PM
Hey dude have you bought your Calmini lift yet?

Before you even put the lift in figure out what you are going to do with you stock front axle. If you think you can run it like it is you will be sadly mistaken. Pls take my words of advice and build a steel front axle to replace the stock aluminum one. Plus do a spacer setup on you cv joints unless you like hopping out everythime you flex the front end to reset you shafts.

If you would like some info I would be more than happy to help you out as I am doing a custom front axle/cv setup on my Calmini lift as we speak.

If you break it, Tunerize it!

<center>http://www.members.shaw.ca/hreidie/drinker%20pint.gif</center>
<center>OFF CAMBER - Member</center>
<center>Kernal Mustard Called, He said "GET A CLUE!"</center>

LocashMikey
02-20-2003, 09:20 PM
Ya I have but I pick it up next week. Any help I can get will be great I'll give you a shout when I get the lift on Tues or Wed.
Thanks for the info

Locash was in the house
91 Tracker
Under Construction
3" body and 3" Calmini suspension lifts and 32" tires

Tuner Inside
02-21-2003, 10:23 AM
I just posted some stuff on bc4x4. I am compiling a list right now for Camini owners. I will send the info to you tonight. Skip the 32's and go straight to 33's.

<center>http://www.members.shaw.ca/hreidie/drinker%20pint.gif</center>
<center>OFF CAMBER - Member</center>
<center>Kernal Mustard Called, He said "GET A CLUE!"</center>

LocashMikey
02-21-2003, 12:12 PM
Skip the 32's To late I already ordered them

Locash was in the house
91 Tracker
Under Construction
3" body and 3" Calmini suspension lifts and 32" tires

Tuner Inside
02-21-2003, 08:46 PM
Hey dude sorry I havent even worked on the material I was going to send you. I got stuck going out for a mtn bike ride. Going to try to get it done tommorow.

What tires did you order anyways?

<center>http://www.members.shaw.ca/hreidie/drinker%20pint.gif</center>
<center>OFF CAMBER - Member</center>
<center>Kernal Mustard Called, He said "GET A CLUE!"</center>

LocashMikey
02-21-2003, 08:53 PM
32/11.5/15 BFG MT's. I was going to go with 33's but wanted to make sure the tires would fit its only 1/2 inch difference in hight from the ground to the diff so I thought that it will do untill I get all the bugs worked out. The only thing that is going to mess things up might be my off set is to big on the rims that I have.
Mike[a]

Locash was in the house
91 Tracker
Under Construction
3" body and 3" Calmini suspension lifts and 32" tires

Tuner Inside
02-22-2003, 08:09 AM
Got sawzall? Im going to cut my front fenders and move the floor board back. Mainly because I want to run wide and that shit just gets in the way. Plus I have the tools to do the work.

But I'm a few months off of that.

<center>http://www.members.shaw.ca/hreidie/drinker%20pint.gif</center>
<center>OFF CAMBER - Member</center>
<center>Kernal Mustard Called, He said "GET A CLUE!"</center>

LocashMikey
02-22-2003, 08:59 AM
Sweet Keep me informed

Locash was in the house
91 Tracker
Under Construction
3" body and 3" Calmini suspension lifts and 32" tires