PDA

View Full Version : Hey phildo.. Tweet question


Tunabomber
02-27-2014, 02:58 PM
http://i158.photobucket.com/albums/t83/mrtuna/aaa%20moble%20upoads/20140227_123921_zpsqp660r8z.jpg (http://s158.photobucket.com/user/mrtuna/media/aaa%20moble%20upoads/20140227_123921_zpsqp660r8z.jpg.html)How do i make this do stuff...

Outside wires? Im guessing?


Hooking up to ppi tweeter wire coming from crossover box.

Honky
02-27-2014, 03:11 PM
I’m no expert but I would say you have to unscrew it, stuff it full of dried plants then put some kind of flame up to it

vajayjay
02-27-2014, 03:22 PM
I"d say quit worrying about lights and music and get your 4wd working

Cheese eyes
02-27-2014, 03:45 PM
is this on facebook ?

FKN MRK
02-27-2014, 03:55 PM
:confused0006: Who smokes Macdonald special? [f]

Happypants
02-27-2014, 04:07 PM
Wtf is that? A airbag?

Chopstick
02-27-2014, 05:56 PM
Wtf is that? A airbag?

Its a tweeter for the stereo

Happypants
02-27-2014, 05:57 PM
Oh...lol...couldn't tell on my phone lol

Casselman
02-27-2014, 06:09 PM
my tweeters were all plug and play :dontknow:

Tunabomber
02-27-2014, 06:50 PM
Ya tweeter

The speakers i have use detached tweets.

One of them dont work so i figured i would just power up the stock ones that are there already.


But the factory tweets have 3 poles and a resistor rather than the 2 wires i have.


Im pretty sure the resistor thingy is to cross over the signal
But since im already sending a crossed over signal do i bypass the resistor or just use the factory wire?

Casselman
02-27-2014, 06:58 PM
Ya tweeter

The speakers i have use detached tweets.

One of them dont work so i figured i would just power up the stock ones that are there already.


But the factory tweets have 3 poles and a resistor rather than the 2 wires i have.


Im pretty sure the resistor thingy is to cross over the signal
But since im already sending a crossed over signal do i bypass the resistor or just use the factory wire?

why not just buy new tweeters? you can buy a set for 40-200$ depending on brands

Honky
02-27-2014, 08:51 PM
why not just buy new tweeters? you can buy a set for 40-200$ depending on brands
and he could buy a install kit for his gearset insteadRice

gavman
02-27-2014, 10:40 PM
In my best "rocky " voice.......

ADRIENNE ADRIENNE

Trailjunkie
02-27-2014, 11:25 PM
i can show you how to use that brass thingy if you bring it over.

Tunabomber
02-28-2014, 12:11 AM
and he could buy a install kit for his gearset insteadRice

Im useing what i have so i dont spend money on things that arnt a gear instal

dirka dave
02-28-2014, 07:15 AM
:confused0006: Who smokes Macdonald special? [f]

Hahah.

epic3
02-28-2014, 04:57 PM
cut the plug off and wire it up to a full range signal. That little black thing on the back is its own (shitty) crossover.

Tunabomber
02-28-2014, 06:00 PM
cut the plug off and wire it up to a full range signal. That little black thing on the back is its own (shitty) crossover.


So piggy back the wires going to my door speaker and let that resistor thingy handle the crossover?



Im surprised i figured use the ppi crossover and bypass the resistor thingy

epic3
02-28-2014, 07:16 PM
ok do that then as long as the impedance of the two tweeters is the same

Tunabomber
03-01-2014, 11:16 AM
Thanks phil