PDA

View Full Version : xj alternator relocate and upgrade


bcmaxx
01-20-2014, 03:59 PM
I swear there was a thread here on doing a relocate and upgrade on a cherokee. I finally got my 150 amp caddy alternator a spare bracket, and I just wanted to see how it was mounted up, cant fine the pic anywhere

vajayjay
01-20-2014, 09:28 PM
I had my stock altenator mounted up top where the compressor should be

http://www.funinbc.com/forum/showthread.php?t=101412&highlight=relocate

Happypants
01-20-2014, 09:43 PM
And people bitched about the stickies in the jeep room...lollol, fuckin chopstick

bcmaxx
01-20-2014, 09:48 PM
Thanks. Mines a bit bigger . Going to try and use a hole where my compressor used to be and use to be and rig an old alt bracket to the back as a brace. I still have some little m8 bably heims to rig up a turnbuckle brace if i need

vajayjay
01-20-2014, 09:53 PM
I had mine mounted to the ac base. One bolt just used the stock hole and the top was bolted to the bracket using the stock altenator bracket

bcmaxx
03-07-2014, 10:23 AM
I had mine mounted to the ac base. One bolt just used the stock hole and the top was bolted to the bracket using the stock altenator bracket

bolts right on! plugs right in! no shimming, nothing just install. making a rear bracket today.
http://i232.photobucket.com/albums/ee110/bcmaxx/20140306_194506_zps08db3c3f.jpg (http://s232.photobucket.com/user/bcmaxx/media/20140306_194506_zps08db3c3f.jpg.html)
http://i232.photobucket.com/albums/ee110/bcmaxx/Messenger_5847552061124477498_13941650536523934_zp s5c7880fe.jpg (http://s232.photobucket.com/user/bcmaxx/media/Messenger_5847552061124477498_13941650536523934_zp s5c7880fe.jpg.html)
http://i232.photobucket.com/albums/ee110/bcmaxx/Messenger_5847549978484945531_13941645571110449_zp s9be0875a.jpg (http://s232.photobucket.com/user/bcmaxx/media/Messenger_5847549978484945531_13941645571110449_zp s9be0875a.jpg.html)

vajayjay
03-07-2014, 07:14 PM
YUP :party0010:

Chopstick
03-07-2014, 09:10 PM
Or you could of bought sealed bearings for under $20 an fixed the alt problems.

bcmaxx
03-07-2014, 10:56 PM
Or you could of bought sealed bearings for under $20 an fixed the alt problems.

Mine was perfecty operational .. But way too small for my needs.