PDA

View Full Version : 14BFF


Apathy
12-16-2013, 10:19 AM
OK, how in gods name do you get the factory spring perches off of a 14bolt?

the cast ones that re welded on.
I have ground out the entire weld seam and then some.... is there something i don't know?
i gave up last night as i was tired of the grinder

procircuit
12-16-2013, 10:52 AM
turn down the suck might help

Apathy
12-16-2013, 11:12 AM
turn down the suck might help

so, are you saying its just a PITA and keep grinding?

lincoln locked
12-16-2013, 12:15 PM
it helps to cut it in pieces and work your way to the center takes a lot of grinding and a big hammer helps too,[cheers] good luck

Nutbar
12-16-2013, 02:37 PM
I very carefully cut into them with the Oxy torch and managed to save em for reuse

Apathy
12-16-2013, 02:55 PM
I very carefully cut into them with the Oxy torch and managed to save em for reuse

I'm out of oxygen and no money till after christmas.. BOOOO

I have lots of grinding disks though. lol

procircuit
12-16-2013, 03:07 PM
plasma?

Apathy
12-16-2013, 03:20 PM
plasma?

Plasma is for rich gingers who don't have teen age kids. lol

Pudge
12-16-2013, 03:30 PM
Bahahahahah

procircuit
12-16-2013, 03:34 PM
Plasma is for rich gingers who don't have teen age kids. lol

i hate chur face :ballsmack:cool:

T-donk
12-16-2013, 05:05 PM
hahahaha

bjo44
12-16-2013, 06:20 PM
keep grinding BFH also:dontknow:

Happypants
12-16-2013, 07:45 PM
Yup, cut it up and a big hammer,

4skin
12-16-2013, 07:48 PM
Pussy are you so used to management now you don't want to get dirty
Are you turning into a panty waist bitch start grinding
Damm yanky

homeboy
12-16-2013, 08:59 PM
grinder and torched mine

85chevy
12-16-2013, 09:15 PM
I just used a zip disc and a BFH wasn't hard at all

Apathy
12-17-2013, 09:20 AM
Pussy are you so used to management now you don't want to get dirty
Are you turning into a panty waist bitch start grinding
Damm yanky

oh, i'll get it done.. i was just tired of grinding the other day.

Just wondering if there was any internal welds, didnt' want to waste my time.

so bite me[cheers]

Burge
12-17-2013, 11:32 AM
zippy disc and then grind off whats left.

Happypants
12-17-2013, 01:43 PM
The spring perches on my d44 I didn't have to use a grinder to take them off lol, whoever welded them on before I bought them did the worst weld job on it ever lol,

Apathy
12-17-2013, 02:44 PM
the one i have to take off on the D60 was a piece of cake..

just the 14 bolt ones. a PITA

epic3
12-20-2013, 12:34 AM
leave em on go spring under lol

78bronco
12-20-2013, 07:16 AM
i used a cutting torch and a hammer