PDA

View Full Version : Raising from the ashes


4skin
11-30-2013, 11:17 PM
Well this will be a new start as many know my last one went up in a blaze
Unfortunately there was no glory
Some buds came over today and helped cut all the burnt shit off
169215 concept of what I'm thinking
Little bit bigger version of stinkys zuki with a Exo but still have a removable top

4skin
11-30-2013, 11:20 PM
169216 and no not a new idea either

Burge
11-30-2013, 11:42 PM
bad ass

Always broke
12-01-2013, 12:02 AM
Me likey!!

StinkFinger
12-01-2013, 12:06 AM
That's a dumb idea pffft who would make there own extended cab

Burge
12-01-2013, 12:10 AM
a full tube bed like the last build would be cool.

Cheese eyes
12-01-2013, 01:12 AM
Well my life has takin a turn so maybe we need to talk ....:)






Annnnnd I have most of that already .... Just saying :cool:

UU
12-01-2013, 09:17 AM
[16] its still a toyota

MOOSEHUNTER
12-01-2013, 09:33 AM
looks like that will be cool. but u u is right it's still a Toyota

4skin
12-01-2013, 10:02 AM
It will still be more toyota than most of the the jeeps that actually wheel
And cherocars don't count those are for taking the kids to soccer

4skin
12-01-2013, 10:34 AM
And this ones going to have to be a low buck build
Useing stuff I already have can't do another build like the willys
Just don't have the money to do it again

Griswold
12-01-2013, 10:36 AM
Cool Cool [cheers] drama

procircuit
12-01-2013, 11:23 AM
That's a sweet plan

Cheese eyes
12-01-2013, 11:48 AM
:cool:

























_________________

Legend
12-01-2013, 12:34 PM
That will be bad ass bruce

Happypants
12-01-2013, 12:39 PM
lets do this bruce, ill help any way possible, just LET ME KNOW!!

Always broke
12-01-2013, 01:52 PM
Can't wait let's get r dun'

bjo44
12-01-2013, 04:47 PM
gonna be cool bruce right on bud:D

bjo44
12-01-2013, 04:48 PM
yo bruce what can be used from the willys:dontknow:

4skin
12-01-2013, 04:51 PM
Looks like most of the suspension survived now just need to figure out how to use it

Happypants
12-01-2013, 08:38 PM
Coil overs and coils?

StinkFinger
12-01-2013, 11:07 PM
run coils overs in the front coils in the rear then you can keep a bed floor

T 'n' A Barbie
12-02-2013, 12:21 AM
That would be sweet.
Were just around the corner...holler if ya need some help :)

4skin
12-02-2013, 12:44 AM
run coils overs in the front coils in the rear then you can keep a bed floor

This is what I'm thinking only have one set of coil overs left
Xj coils in the rear or 1/4 elliptical have a few different ideas

Always broke
12-02-2013, 08:20 AM
Hey Bruce there are coils and matching shocks in the back of the cruiser just sayin'

Chopstick
12-02-2013, 08:58 AM
how do u always find the cool trucks! did you pick that one up already? how muchy?

maybe i should build one of those aswell, awesome looking rig

bjo44
12-02-2013, 01:49 PM
xj coils will work nice bud I got some if you need them:dontknow:

4skin
12-02-2013, 06:51 PM
Not that truck choppy I'm building it outa the parts in my yard

Trailjunkie
12-02-2013, 07:32 PM
lol choppy stop talking . its not that one its to be built try to open eyes wider silly slothchop.

looks cool bruce what kind of rust inhibitor are you goin to use to hold it together?

StinkFinger
12-02-2013, 07:35 PM
i still have the xj coils from my zuki and the retainers that i built for them pm me your number bruce

mudslinger4.0
12-02-2013, 10:17 PM
looks like a bad ass build [36]

epic3
12-03-2013, 11:23 AM
get on it bud!

Chopstick
12-03-2013, 01:26 PM
I really want a truck like that! So sexy! I think im in love!

4skin
12-14-2013, 03:27 PM
Will have the new one home next week to start the buildy buildy
The waiting sucks lol

bjo44
12-14-2013, 04:52 PM
sucks waiting hey bud:(

lincoln locked
12-14-2013, 05:16 PM
well i cant wait to see this come together , right on Bruce :D

bjo44
12-14-2013, 11:04 PM
cant wait[cheers]

skyjacker
12-15-2013, 11:33 AM
Looks sweet [cheers]

BigRon
12-15-2013, 02:05 PM
Sweet I likey

4skin
12-17-2013, 11:41 PM
Well there's a pile of landcruiser bits in my shop now thanks Frey
And mat and tod and others that helped now to build a truck outa it

procircuit
12-18-2013, 07:35 AM
nice!

bjo44
12-19-2013, 04:05 PM
hows it comin bud

4skin
12-29-2013, 11:51 PM
Not much to report just building some stands so I can start building

atoyot
12-30-2013, 01:21 AM
then its done right......
n u can come wheelin again....

4skin
12-30-2013, 01:16 PM
Working on Geting some one tons now
Being as how my toy diffs probably won't like a small block

mini
12-30-2013, 05:23 PM
damn it bruce hurry up!!!

Trailjunkie
12-30-2013, 09:08 PM
done yet?
























































how bout now?

atoyot
12-30-2013, 10:15 PM
insert..more cowbell.
.

.
.
.
..

4skin
01-01-2014, 10:04 PM
Well traded some cruiser parts for a front dana 60
So the parts collecting has started

85chevy
01-01-2014, 10:19 PM
Well traded some cruiser parts for a front dana 60
So the parts collecting has started
You go Drivers or Passenger side drop?

StinkFinger
01-01-2014, 10:52 PM
ow sell that for the aam diffs

Reeseman
01-08-2014, 09:02 PM
Kick ass buddy let me know if i can help.

StinkFinger
01-08-2014, 11:03 PM
i have a rear 60 here too bruce

Happypants
01-08-2014, 11:46 PM
rockwells, 54`s, 602 alum big block, so big we gotta cut the roof off to get it outta the shop! do it! lollol

Roxy-skye
01-08-2014, 11:50 PM
[cheers]Goooonnnaaa beeee siiick! stoked to see how it turns out!

4skin
01-09-2014, 12:34 AM
Just cutting the burnt one up to salvage the links and what I can
Engine is out trans and cases are out tomorrow nite will be getting the front link brackets off the frame this should be fun

atoyot
01-09-2014, 01:14 AM
RISE FROM THE ASHES FASTER!!!!![36] [36] [cheers] [cheers] :D

bjo44
01-09-2014, 11:32 AM
faster faster faster:D

4skin
01-09-2014, 09:57 PM
Well all the front suspension is out Laying in a pile and the bed is well on its way to just being assorted lengths of tubeing
I can't even take pictures as my camera was in it when it burnt to

4skin
01-09-2014, 11:38 PM
By sat the willys will be nothing but memories

toyon35s
01-09-2014, 11:40 PM
Build on Bruce , you can only build bigger and better

4skin
01-11-2014, 04:23 PM
Willys is a pile of bits now one cruiser is gone traded for a dana 60 front that's been cut and turned with 4.88 gears

4skin
01-14-2014, 11:14 PM
And draging shit in place damm dana 60 are heavy

harvester_sorrow
01-14-2014, 11:37 PM
down grade to a 30 :D

Hellboy
01-15-2014, 12:32 AM
Welded Dana 30's should be fine I'm with Jamie on this one lol :D

procircuit
01-15-2014, 07:36 AM
And draging shit in place damm dana 60 are heavy
watch ur toes!:rolleyes:

85chevy
01-15-2014, 07:46 PM
And draging shit in place damm dana 60 are heavy
yea they are by no means light but they do make stuff look small[cheers]

The King Machine
01-15-2014, 08:48 PM
nice,

will this vehicle have a OD green paint job?

4skin
01-15-2014, 11:34 PM
No olive drab might be original cruiser tan or red
Haven't made that choice yet have a while before I need to think about paint

Trailjunkie
01-15-2014, 11:39 PM
your not done yet wtf. missin you on the trail buddy

4skin
02-16-2014, 11:17 AM
Been buisy170965
















Looking at pictures

4skin
02-16-2014, 11:37 AM
170976like the look of this

mus-Tard
02-16-2014, 11:42 AM
rear stear?

patford
02-16-2014, 12:27 PM
Wow looks good , need some of that drive around here to finsh couple of my 4x4 projects. keep up the hard work .

StinkFinger
02-16-2014, 12:31 PM
front diff is pushed to far forward other than that its cool

85chevy
02-16-2014, 05:03 PM
That is going to be a sweet rig[cheers]

Trailjunkie
02-16-2014, 05:08 PM
done yet goat roper??

4skin
02-16-2014, 06:33 PM
Yea front diff is to far forward
They did some weird stuff the motor and trans tcase are mounted really high
Sit 5or6 inches above the bottom of the belly pan
Just looking at ideas on how to build mine while collecting parts
And building other peeps stuff to buy parts
Soon will be bending tube time

procircuit
02-16-2014, 09:39 PM
Like the idea,!

StinkFinger
02-16-2014, 09:52 PM
is there abuild thred on that blue one some where ?

Hellboy
02-16-2014, 10:32 PM
Wow looks good , need some of that drive around here to finsh couple of my 4x4 projects. keep up the hard work .

It is hard work to look at pictures strains the eyes and all

I like that blue looks sharp does that thing have rear steer?

4skin
02-17-2014, 12:33 AM
is there abuild thred on that blue one some where ?

Kentucky krawlers the build thread is yoda full blown build

playtime
03-13-2014, 05:28 PM
Can't wait love the last rig this one should be even sweeter!!!