PDA

View Full Version : Frame prep


Tunabomber
10-07-2013, 07:07 PM
So the underside of my hoe is kinda messy... Mostly dirt sand and tranny fluid from a input seal leak.

Anythoughts on what works ( thinking degreaser and pressure washer)

Going to por15...the frame is evenly coated already in thin surface rust so a quick sand and dust should provide a good surface for the product but the oily spots im wondering about

85chevy
10-07-2013, 07:19 PM
a degreaser:dontknow:

Tunabomber
10-07-2013, 07:47 PM
Ya thats what im thinking but figured maybe someone has exper ience with something that works good

StinkFinger
10-07-2013, 08:35 PM
rattle cans

SHITTY
10-07-2013, 08:52 PM
pre soak with degreaser then use a hot water pressure washer.

4skin
10-07-2013, 10:06 PM
Just armorall the dirt in it will impress the Wendy's wheelers more
If they think you use it

atoyot
10-08-2013, 12:01 AM
rattle cans

for the win......[36]
.
.
.
.

epic3
10-08-2013, 01:22 PM
the stuff I used on Colins 36' ford chassis and on my sliders is real nice comes in a rattle can. Its a Dominion Seal? product spray on bed liner. $10 bucks a can gives good coverage holds up well my sliders havent scratched off yet. 6 cans did Colins entire chassis.