PDA

View Full Version : dana 60 caliper bracccket


Punk in Drublic
04-04-2013, 01:25 PM
fuckered mine when the wheel fell off, anyone know if its compatible with a ttb, thinking that would be easier to find, or anyone got a passanger side caliper bracket or whole outer knuckle kicking around.

B
04-04-2013, 01:27 PM
yes whole knuckle out is the same 8 bolt to eight bolt ...

Punk in Drublic
04-04-2013, 02:03 PM
[cheers] thanks be thats what i was hoping.

Apathy
04-04-2013, 02:31 PM
yes whole knuckle out is the same 8 bolt to eight bolt ...

are you sure?

I was told the knuckle NO, but brakes and spindle yes.
something to do with the register in the D50.

Punk in Drublic
04-04-2013, 02:37 PM
pretty sure all i really need is the caliper bracket. i hope.

Happypants
04-04-2013, 02:41 PM
I think that the calipers will work

Apathy
04-04-2013, 02:42 PM
http://www.philofab.com/temp/Dana50_vs_60_013.jpg

Punk in Drublic
04-04-2013, 02:49 PM
thats fine jer pretty sure the spindle is fine :party0010:

thanks guys.

78bronco
04-04-2013, 11:42 PM
i happen to have a really nice set of brackets and rotors and rotors
rotors new never had pads touch it
new calipers never had fluid in them
sand blasted and painted wit por 15 brackets

250 takes it all

Punk in Drublic
04-04-2013, 11:47 PM
they are off a late 80's early 90's? ill check em out.

dirka dave
04-05-2013, 09:41 AM
http://i50.photobucket.com/albums/f328/david_corry/more%20photos/even%20more%20photos/5EF80DF3-3CFC-4FBD-BBEB-3A88460DEF45-2839-000002269FCC5FD3.jpg

http://i50.photobucket.com/albums/f328/david_corry/more%20photos/even%20more%20photos/40B2BF1C-9B65-4DD7-A569-DC5EA18BFD28-2839-00000226A289548B.jpg

http://i50.photobucket.com/albums/f328/david_corry/more%20photos/even%20more%20photos/4672B027-7143-4F46-8761-E0CE012C3074-2839-00000226A5259A3A.jpg

Punk in Drublic
04-05-2013, 10:53 AM
i only see the passenger side there dave, i need drivers. i found one though, joe is parting an f250.

4skin
04-06-2013, 02:44 PM
The caliper bracket is cast into the knuckle on the ttbi
Front thought the straight axle wasn't

Punk in Drublic
04-06-2013, 05:33 PM
http://thumbs2.ebaystatic.com/d/l225/m/mad3MSO_gYiR9apTulcMqSg.jpg

that be what i need

Punk in Drublic
04-06-2013, 05:34 PM
cept thats drivers side, i need passenger side

4skin
04-06-2013, 11:45 PM
Just put it on backwards

dirka dave
04-07-2013, 10:06 AM
Have the other side....:roll eyes

78bronco
04-07-2013, 10:07 AM
they are off a 1979 dana 60

In The Zone
04-07-2013, 11:17 AM
http://thumbs2.ebaystatic.com/d/l225/m/mad3MSO_gYiR9apTulcMqSg.jpg

that be what i need


That is a single cast unit from a d50ttb it will not work on a solid axle... just sayin...

Now unless u have a ttb front end then u can use the whole unit... for parts...

Punk in Drublic
04-07-2013, 11:51 AM
the dana 50 ttb unit works on some dana 60's, not all. i thought my calliper bracket was seperate but its not, it is cast into the knuckle. from everything i have read if i have the single cast unit it is the same as the dana 50 unit.

Punk in Drublic
04-07-2013, 12:02 PM
the pic i posted looks identical to the one in my truck, but i havent compared them side x side yet. im pretty sure i dont have a ttb in the ford, but i guess i could be wrong lol

4skin
04-07-2013, 12:52 PM
Punks is a ball joint straight axle 60
But what is broken on your punk

Punk in Drublic
04-07-2013, 01:36 PM
when the tire fell off it sheared the ears off of where the slide pin goes on the knuckle side. broke about half the groove off. ill get a pic, hard to explain.

4skin
04-07-2013, 02:59 PM
Just wondering if it could be fixed welded up or something till you find one

Punk in Drublic
04-07-2013, 03:52 PM
yea i was looking at it, it could be, but its cast. dirkas bringing me one off a ttb tomorrow so ill know then if it will work, or what.

dirka dave
04-07-2013, 03:56 PM
Das beater is loaded.

So is the driver. :D

Happypants
04-07-2013, 04:25 PM
Toss the mount in the BBQ for a while then weld it up, ;)

Punk in Drublic
04-07-2013, 04:45 PM
nah, not with brakes. ill just change the knuckle out, pretty sure i found a couple. found a few cases of them braking on the neterweb, so having an extra might not be a bad idea.