PDA

View Full Version : 84 reg cab no brake lights


Stu_Dawg
03-12-2013, 08:50 PM
hey all, I just bought an 84 reg cab and the brake lights dont work. the blinkers and running lights work but no brakes. there are 2 wires coming from the cab that I have plugged into the bulb and either combo doesn't work. the fuse isn't blown because if I ground it to the frame the light comes on. what else can i do to get this bitch on the road?

thanks[cheers]

4skin
03-12-2013, 09:40 PM
What tail lites stock or are you trying to run a single tail light
If I remember its a 1157 bulb dual filament for stop and running
And a 1156 single filament bulb for turn
A bad ground could cause brake lights not to work others are grounding through
Brake light

Hello Kitty
03-13-2013, 10:02 PM
What tail lites stock or are you trying to run a single tail light
If I remember its a 1157 bulb dual filament for stop and running
And a 1156 single filament bulb for turn
A bad ground could cause brake lights not to work others are grounding through
Brake light

Manuel says 1034 :confused0006: but should say on cover. Had similar and checked bulbs and they needed a sand as corroded or like 4skin said eh