PDA

View Full Version : 22 re efi circut opening relay


deer laredo
02-25-2013, 01:00 AM
Ive finally got it running by powering the top right wire on the connector of the circut opening relay. Can someone tell me why there wasnt power there wile cranking

4skin
02-25-2013, 01:32 AM
Ign switch dead on that circuit on crank
There is three ign circuits from the switch if I remember correctly
It's possible that its losing power to one of them in the switch
Seem to remember you said you changed a computer before
And it cured it for a bit might have been coincident
Try changing the ign switch if you look they are marked on the switch
You could try testing it with a multi meter and see if you have power there
If so start checking to relays

atoyot
02-25-2013, 01:44 AM
ignition sw
..

.
.
.

Redneck_04
02-28-2013, 07:24 AM
On mine I just replaced the relay now no problems starts and runs everytime

deer laredo
03-04-2013, 01:30 AM
I just ran a new wire from ignition to relay

trackyota
03-04-2013, 12:21 PM
Bingo new 12v wire will fix it