PDA

View Full Version : the build begins,with pics


toyon35s
09-15-2012, 09:41 PM
figured its about time to start my new project,i picked up a 88 4runner thats bobbed,exoed and three linked in the rear [36] [36] ,plans are to drop in my 450+hp 383 stroker backed with a built 700r4 208 combo,longfield 30 spline super axles up front and will be rollong 38s or 40s havent decided yet,pics will be up soon [cheers]

procircuit
09-15-2012, 10:29 PM
Done yet

toyon35s
09-15-2012, 11:31 PM
this is how she looks now before the build starts

http://i154.photobucket.com/albums/s280/larryNkim/Facebook/Mobile%20Uploads/179907_4183915803479_2075784054_n.jpg

Jimmie
09-16-2012, 12:37 AM
383 w 450hp = get 1tons now n don't waste time with toys lol

toyon35s
09-16-2012, 01:15 AM
383 w 450hp = get 1tons now n don't waste time with toys lol

longs are stronger than a d60 ,and the rears are almost as big as a 14bolt :D

Jimmie
09-16-2012, 01:51 AM
longs are stronger than a d60 ,and the rears are almost as big as a 14bolt :D

no not at all , I have exploded enough toy diff stuff with a 22re and 37's to know

Also toys have a 8" ring gear vs. The 9.75" & 10.5" of the one tons , but you know that's pretty much the same .....

toyon35s
09-16-2012, 02:42 AM
no not at all , I have exploded enough toy diff stuff with a 22re and 37's to know

Also toys have a 8" ring gear vs. The 9.75" & 10.5" of the one tons , but you know that's pretty much the same .....

know a few guys running 350s in there toys they only break front stock toy stuff,rears hold up no problem

85chevy
09-16-2012, 09:34 AM
know a few guys running 350s in there toys they only break front stock toy stuff,rears hold up no problem
350s not 383 strokers with a lot more grunt:dontknow: Horsepower doesn't break anything its the torque that breaks shit

Toyquad
09-16-2012, 10:25 AM
i know guys who break rear 3rds all the time with 350's.

Punk in Drublic
09-16-2012, 10:26 AM
giv'r'shit [fire] fuken nay sayers

toyon35s
09-16-2012, 11:54 AM
giv'r'shit [fire] fuken nay sayers

[36] [36] [36] [cheers]

toyon35s
09-16-2012, 05:51 PM
it had no dash or interiour in it ,but now does [36] [36] put the 33inch rollers on it for now ,gettin ready to take it my buddys shop and install the motor ,tranny and case,this build is going at a not bad speed lol[cheers]

toyon35s
09-16-2012, 06:03 PM
how it looks with the rollers on it
http://i154.photobucket.com/albums/s280/larryNkim/Facebook/Mobile%20Uploads/308187_4403456451858_682951996_n.jpg
interiour so far
http://i154.photobucket.com/albums/s280/larryNkim/Facebook/Mobile%20Uploads/217861_4403458091899_1360022464_n.jpg
http://i154.photobucket.com/albums/s280/larryNkim/Facebook/Mobile%20Uploads/53048[IMG]http://i154.photobucket.com/albums/s280/larryN7_4403459211927_886020844_n.jpg

and of course since it a new built why not start of fresh [36] [36] [36]
http://i154.photobucket.com/albums/s280/larryNkim/Facebook/Mobile%20Uploads/545677_4403464892069_1825698544_n.jpg

procircuit
09-17-2012, 04:47 PM
seats, dash an rollers.... hell thats pretty much all of it[36]


done yet[f]

gavman
09-17-2012, 08:36 PM
watching. cool starter truck

toyon35s
09-17-2012, 08:58 PM
seats, dash an rollers.... hell thats pretty much all of it[36]


done yet[f]


not yet,waiting on my buddy to help with the motor install,then off to another buddys for new lift so i can clear the 38s i plan on running ,might be done in time to do some winter wheeling [36] [cheers]

hoser
09-17-2012, 09:08 PM
good platform to start with...[36]

if u need anything i will be parting my 89 out pretty quick

toyon35s
09-18-2012, 12:22 AM
i might need a few things ill let you know [cheers]

toyon35s
10-13-2012, 03:58 AM
been slow ,still waitin on buddy to take the truck to his shop ,but soon ,very soon [cheers]

4skin
10-13-2012, 11:28 AM
Can you break a Toyota diff shure
I used to break 60 s with a 300 six on 36 in swampers
All depends on how you drive it
Never broke the diffs in my 4runner running38.5 boggers double tcase
And it got beat on

arjan
10-13-2012, 07:36 PM
it's in pretty rough shape for the milage...

Punk in Drublic
10-13-2012, 07:44 PM
Can you break a Toyota diff shure
I used to break 60 s with a 300 six on 36 in swampers
All depends on how you drive it
Never broke the diffs in my 4runner running38.5 boggers double tcase
And it got beat on

damn i thought i was the only one to ever do that.
but my 300 made over 250 hp and fuckbarrels of torque

toyon35s
01-13-2013, 11:32 PM
finally got the 4runner in my garage ,got the old welded motor mounts and bump stops cut out and ground the frame down gettin it ready for the proper chevy ones,also got the doors and top off and cleaned out the rear ,lots left to do but im gettin it done now [36] [36]

jordanbennett
01-13-2013, 11:49 PM
good to see someone finally building this, darrel and i both tripped over this thing for ever, had lots of good ideas for it.. should be a fun build non the less[36] 400hp and toy diffs scare me, but it each it own, enjoy.

toyon35s
01-14-2013, 12:55 AM
its a slow go but its getting done ,will be out for spring [cheers]

toyon35s
01-19-2013, 01:43 PM
well went out today got some mint doors,and a near mint tailgate for 180$,picking up the motor mounts next weekend and should have them tacked in and then mock up my tranny/case ,then its final welds and install,gettin closer
buildy buildy [cheers]

Griswold
01-23-2013, 11:45 AM
any new pics yet

procircuit
01-23-2013, 12:05 PM
how bout now..

toyon35s
01-23-2013, 05:35 PM
no new pics yet,its a slow go working in a non heated garage lol,will have some soon though

toyon35s
01-31-2013, 09:22 PM
start the motor install this weekend ,but since ive been waiting i got the body ready for new paint ,and the interior all cleaned and ready for install,should be nice when it finally rolls out [cheers]

C-Dog
01-31-2013, 11:05 PM
lol [16] Larry still no pics [16]



Your title says ( with pics ) ?????? WTF :dontknow:

toyon35s
01-31-2013, 11:30 PM
soon,i have to pull it out of the garage to wash off all the dust so it can be primed so ill shoot a few pics [cheers]

procircuit
02-01-2013, 10:55 AM
[18][18]

atoyot
02-01-2013, 12:34 PM
so more pixxx yet????.

.
.
.
..

.
.
.
...
.
.
.wheelin.


..

.

toyon35s
02-02-2013, 05:43 PM
http://i154.photobucket.com/albums/s280/larryNkim/photo1_zpsa5573ce1.jpg

http://i154.photobucket.com/albums/s280/larryNkim/side_zps311da926.jpg


have you seen a tailgate this nice







http://i154.photobucket.com/albums/s280/larryNkim/tailgate_zps871fe248.jpg

theres some pics

toyon35s
02-02-2013, 11:57 PM
fully ready to be primed and painted ,now comes the motor install and get this bitch running [cheers]

toyon35s
02-04-2013, 05:28 PM
fully primed up and ready for paint
http://i154.photobucket.com/albums/s280/larryNkim/primed2_zps3e83b650.jpg




http://i154.photobucket.com/albums/s280/larryNkim/primed_zps6deb4a09.jpg

Happypants
02-04-2013, 05:31 PM
i know guys who break rear 3rds all the time with 350's.

sounds like kieth the doughnut king lol

vajayjay
02-04-2013, 08:24 PM
All this anticipation for pics and thats it?

Your everyday exoed 4 runner [16] :D

Looks good, I too like shiny painted things [36]

toyon35s
02-04-2013, 09:43 PM
thats only primer,just wait until the paint [36] [36] [cheers]

atoyot
02-04-2013, 11:53 PM
ur gonna have fun in that.....

ray
02-05-2013, 12:06 AM
Paint?

procircuit
02-05-2013, 08:30 AM
hot pink or what

Apathy
02-05-2013, 08:52 AM
should have shot the cage as well.. now your going to have to do it twice.

toyon35s
02-05-2013, 03:39 PM
its really not that bad to paint with the cage ,ill paint the cage after,theres enough room that once the truck is painted ill drap the body with poly and spray the cage after ,will work out great [cheers]

toyon35s
02-07-2013, 09:28 PM
should be pickin up my new front diff tomorrow ,its locked with longs and all the goodies so it should hold up [cheers]

toyon35s
02-08-2013, 04:18 PM
got my front diff,thanks again hoser ,and picked up the paint for the truck,buildy buildy [cheers]

toyon35s
02-08-2013, 05:17 PM
mounts are ordered and should be here by thursday ,painting it this weekend and will start putting the interior back in ,soon this bitch will be up and going [cheers]

toyon35s
02-09-2013, 01:11 PM
got the first two coats of paint on,doing two more today then the clear coat,tomorrow should have the exo done then ill post some pics [cheers]

Troy
02-12-2013, 12:04 PM
good to see your working on something Larry!

toyon35s
02-16-2013, 01:21 PM
heres the final on the body,motor install is next

http://i154.photobucket.com/albums/s280/larryNkim/body_zps3a1c55f8.jpg

http://i154.photobucket.com/albums/s280/larryNkim/bodytwo_zps0e580b4c.jpg

toyon35s
02-16-2013, 01:29 PM
didnt get a pic of the top but its white lol[cheers]

Golf Cart Guys Sistr
02-16-2013, 11:57 PM
Looks Good [cheers]

atoyot
02-17-2013, 09:29 PM
yup turned out cool!!!


.
.

toyon35s
02-17-2013, 11:15 PM
had a problem with the motor mount kit that i bought so now making custom mounts,hopefully get the motor in this week sometime [cheers]

Murd0c
02-18-2013, 12:31 PM
Looks awesome, good call on going with the first gen paint job.

toyon35s
02-23-2013, 07:15 PM
test fitted the motor today ,have a few clearence issues to deal with on the motor but the tranny and transfercase fit like a glove,should be building the tranny mount and finishing up the motor mounts tomorrow [cheers]

toyon35s
02-23-2013, 08:43 PM
how the test fit looks so far
http://i154.photobucket.com/albums/s280/larryNkim/motor1_zps9ed27897.jpg

Ivey
02-23-2013, 10:29 PM
looks like it is going to be a nice rig

toyon35s
02-24-2013, 06:32 PM
spent a few hours on it today,got the firewall behind the distributer moved back two inches ,looking like the motor will fit alot better now with radidiator room [cheers]

toyon35s
02-24-2013, 11:02 PM
firewall,shitty pic though

http://i154.photobucket.com/albums/s280/larryNkim/Facebook/Mobile%20Uploads/421403_10200402381969424_761833624_n.jpg


http://i154.photobucket.com/albums/s280/larryNkim/Facebook/Mobile%20Uploads/549886_10200402382329433_1353890639_n.jpg

HEAVY METAL
02-25-2013, 02:28 AM
right on Larry, lookin forward to hittin some trails with ya

4skin
02-25-2013, 12:54 PM
right on Larry, lookin forward to doing some parade laps in the creekbed with ya
Fixed it for ya deaner lol

toyon35s
02-25-2013, 05:35 PM
firewall finished[36] [36]

http://i154.photobucket.com/albums/s280/larryNkim/final_zps8a048a4e.jpg

atoyot
02-25-2013, 08:31 PM
needs burnout pixx.[36]
.
.
:D
.
.

toyon35s
06-06-2013, 12:24 AM
well been a slow go but did get my tranny mount all done ,going next week and getting,my front leafs,going with rear coil overs now ,getting my rad,tires,putting it all together and going to get this bitch out soon [cheers]

toyon35s
06-09-2013, 08:34 PM
tires are ordered,getting the front leafs done tomorrow ,have to get the proper specs for the coil overs then they are on order ,gettin all the parts together [cheers]

toyon35s
06-26-2013, 10:30 PM
picked up my front leafs today,re building and cleanin up the front diff tomorrow getting it ready for install ,still need drive shafts,rad and fans ,headers and new tourqe converter and the rear king coils ,should be done within the next month or so,first outting will be chilliwack mud drags [36] [36] [36] [cheers]

toyon35s
07-15-2013, 11:40 PM
Only need front shocks, shock hoops, drive shafts, fans for the rad and a few other odds and ends to have all the parts for this build, hoping to have it done for the mud drags in August but it's looking faint at this point in time , we will just have to see

toyon35s
07-19-2013, 12:10 AM
motor mounts are in,front diff and new springs in ,lots more to do but getting there slowly,also have my rad and headers ordered [cheers]

toyon35s
07-25-2013, 08:39 PM
headers,rad and wires are all in,motor and tranny will be going in for the last time next weekend and should be running soon after ,still need a few things but getting very close to having it out and about [36] [36] [36] [36]

atoyot
07-25-2013, 09:43 PM
nice!!
should be a fun truck when ur done....
.
.
.

toyon35s
07-25-2013, 09:59 PM
going to be fun,if I ever finish it lol,long ass build but well worth it in the end ,tons of hours into it ,tons of $$$$ but its the last truck ill build,its what I always wanted and with me doing 90% of the work to it ill beable to take it out without worries of someone elses shotty work,cant wait till its done [36] [36] [36] [36] [36]

procircuit
07-26-2013, 07:40 AM
pics.

toyon35s
08-09-2013, 03:50 PM
got the tires ,just a sneak peek of how the truck is looking ,still lots of work before its ready to go though

http://i154.photobucket.com/albums/s280/larryNkim/4runner6_zps110bd6e1.jpg (http://s154.photobucket.com/user/larryNkim/media/4runner6_zps110bd6e1.jpg.html)

http://i154.photobucket.com/albums/s280/larryNkim/4runner5_zps51f8c884.jpg (http://s154.photobucket.com/user/larryNkim/media/4runner5_zps51f8c884.jpg.html)

toyon35s
08-09-2013, 08:35 PM
Hopefully will have the motor and tranny installed for the final time , slow build but well worth it in the end

atoyot
08-09-2013, 09:00 PM
looks cool!!!.

let me know when ur ready tp pound some trails!!!

Taxidermy
08-09-2013, 10:57 PM
Wow! You took that old beater and changed it into a nice Toyota, Great work!

toyon35s
08-10-2013, 06:54 PM
Had to pull the motor and trans out again lol totally forgot to reinforce the front part if the frame lol , stoner moment for sure

toyon35s
09-02-2013, 02:48 AM
Still a slow go on this truck but little bit getting done day by day , maybe ill have it ready for some winter wheeling lol

toyon35s
09-30-2013, 12:52 AM
Well ran outta money for now so the build has come to a crawl , little things here and there , will have it done one day lol

toyon35s
11-07-2013, 10:27 PM
Well got around to getting my plate to reinforce the frame on this truck so it can handle the 383 , cut out two of the pieces for it so far and ran out of Zip disks , getting more disks tomorrow to cut the last two pieces out then welding it all up and finally getting the motor and trans in for the last time , slow but still building away

bjo44
11-08-2013, 01:10 AM
This looks interesting

procircuit
11-08-2013, 07:40 AM
burnouts?

toyon35s
11-08-2013, 08:12 PM
No burnouts yet lol , but gettin lots done , all four frame pieces done , welding them on tomorrow , hopefully have the motor in by next week , then it's back to waiting on funds for the rear coil overs [cheers]

vajayjay
11-08-2013, 09:42 PM
Jealous, I wanna work on mine

toyon35s
11-09-2013, 05:58 PM
All plate is cut and frame is preped , all gets welded in tomorrow then I'll throw up a few pics of the frame finished

toyon35s
11-11-2013, 09:48 PM
Got both outer plates welded on, just have the inners and top plate then it's motor install time [cheers]

procircuit
11-11-2013, 09:54 PM
No pics never happened :)

toyon35s
11-11-2013, 10:51 PM
It's pain posting pics lol, but I'll post up soon

toyon35s
11-21-2013, 03:10 AM
Priced out all the goodies for the rear diff today, looks like it's going to be around 650$ , that's cromoly axles , Yukon gears and a spool , hopefully with the rear done along with the front I won't break every thing right away with the stroker :party0010:

procircuit
11-21-2013, 07:47 AM
pictures?


i likes the pictures...


i see's no pictures...




:D

toyon35s
11-21-2013, 06:58 PM
pictures?


i likes the pictures...


i see's no pictures...




:D

Pics will be up after I get the front finished lol, I'm a slacker and little bits off life get in the way of building , stupid working afternoon shift lol

deer laredo
11-21-2013, 11:26 PM
Save your money on the spool and weld the diff same shit 100 bucks cheaper

toyon35s
11-21-2013, 11:54 PM
Spools way different than welding , I've had a welded diff explode on me , spool is a hell of a lot stronger

Happypants
11-22-2013, 07:40 PM
Spools way different than welding , I've had a welded diff explode on me , spool is a hell of a lot stronger


then u welded it wrong :D lol, jk bud,

build is looking good, wheres the pics at mang?[cheers]

Animal
11-22-2013, 07:45 PM
Lemm know when you part out whats left of them axles.

bjo44
11-25-2013, 10:47 PM
lookin good buddy ,that should be fun

toyon35s
02-06-2014, 01:18 AM
Well frame is finally done, now to install the motor and tranny for the final time, still have to do the front shock hoops but I can do that with the motor and tranny installed , been a longtime coming but it's finally getting installed, fucking stoked [36] [36]

procircuit
02-06-2014, 07:35 AM
pic a tures

toyon35s
02-06-2014, 08:14 AM
pic a tures

Soon , very soon

toyon35s
05-05-2014, 10:53 PM
Been awhile since I worked on this bitch, motor and tranny are mounted for the fin time all bolted up, hope to get the wiring all done and I'm hoping to hear this bitch start, still tons to do but hearing it run will start a fire under my ass , I'll post pics once I fix my stupid computer [36]